That is what I think the concerns are, that things may be too tight as far as the settings go. That all depends on how and what you are programing (2D, surfaces, nurbs, etc....) many cad systems will...
Type: Posts; User: 800MXZ
That is what I think the concerns are, that things may be too tight as far as the settings go. That all depends on how and what you are programing (2D, surfaces, nurbs, etc....) many cad systems will...
We have discovered that definition in posting on some CAD/CAM software certain settings, such as accuracy can have drastic effects. Broken geometry is the next. I am not saying this is your case, but...
Surface - What exact issues are there? I would be more than willing to help as much as I can. There are more 104Ds in our territory then there are in the rest of the country. We went to problems with...
Well all, as many of you know, the 104/D Fadal had a rocky start, but due to software updates, things are looking very good. We have done several projects and tests with the newest software updates,...
Here is a link to the inserts I was speaking of above. The polished face really helps on cast AL as it allows the chip to slide off real easy, with a great reduction of friction (which cuts down on...
Step drills are bad for that. NO where for the chips to go, especially around where the drill changes the diamater. You may want to try more flutes, or even pre-drilling.
I know it sounds cheap, but I have never found anything to work better on AL than good ol WD-40. As fat as tooling, there are allot of advancements in indexable. Iscar and others have new inserts...
I can only talk about something like this in regards to my own experiences.
When I was graduating High School (1993) I was on the honor roll (barely) but had taken allot of "shop" classes. Auto,...
They are a capable achine for what your going to do. They are small capacity, and some limitations on tooling cause of the gang tooling setup. There is allot of thinking on the setup, so you end up...
Hi, I used to sell Haas in the SouthEast part of the country. One concern about Haas and their rotaries, is that the rotaries are not serviced by the dealers. I worked for the Haas dealer of the year...
The story I was given is that DOC has taken over with the Rubicon controll, and moving far forward with further enhancements over Gil's orig. logic. DOC has him on as an advisor.
As far as...