Search:

I have used multiple work offsets on many occasions. using G54.1P1 will throw a alarm. You will have to type in the work offests like as follows

G0G90G54P1X0Y0
M98P____(YOUR SUBROUTINE NUMBER)...

try using G79 i think its g79 i use it to mill soft hartford head jaws all you do is take the radius of the pocket and minus the radius of the cutter and enter it as a "j" interger and you have your...

dx-32 is a dos based computer it looks and runs with a GUI (GraphicaL User Interface, it runs off of MS-DOS has a floppy drive built into it usually and has a very colorful screen, simple to program,...

I run this machine and have the same problem , i unbolted the door lock switch and inserted it back into the door latch this way the machine thinks the door is always closed.... i dont reccomend this...

Anyone have a problem with the coolant on the haas vf2 splashing and making a mess from the coolant coming out of hte machine and into the coolant pan? my hass has one big tank that has four wheels...

i eventualy got my gears chrome plated i forgot to mention. you made a very good point about manufacturers spending a little bit more to get the part to last longer.. i never thought of power...

to use "I" on that control you would press the "x" button twice and the machine will change it to a "I" on its own like for instance if you ar using a "j" value type the "y" button twice and the...

INvest in getting a wash gun for this machine..... it is a nightmare to clean also invest in a short handled transfer shovel, you can get one at HD for cheap for the chips because it sucks trying to...

I use this machine everyday at work and the machine is great but for one exception and this exception is extremely important because ours has just not started becoming a issue and this is what the...

do you know if it will renumber these lines after the program has been written without n numbers though?

by the way let me know at [email protected]

Anyone know of a way to have a bridegeport Dx-32 milling machine automatically insert N number in your program like a hass does?

On a bridgeport Tc1 milling machine with a dx-32 control G41 Is climb milling and G42 is conventional milling simple as that

you might want to try turning off your "corner rounding" if your using cutter diameter compensation i dont recall what the g code is for that

I am currently having a problem sending files from my desktop computer to my laptop computer. The laptop sends files to the desktop without a problem but when I try to send a file from the desktop to...

I use saran wrap to cover the keyboard to see the letters and number and when i use it to write up a program i use the onscreen keyboard (comes with windows) because it sure is cheaper to replace a...

I am currently having a problem sending files from my desktop computer to my laptop computer. The laptop sends files to the desktop without a problem but when I try to send a file from the desktop to...