Hi Tom,
Thanks for your reply.
So you must have changed it before by mistake correct?
Yes, I have changed the file to declare TMP.
I had issues with TMP undeclared while compiling: It was...
Type: Posts; User: jewe
Hi Tom,
Thanks for your reply.
So you must have changed it before by mistake correct?
Yes, I have changed the file to declare TMP.
I had issues with TMP undeclared while compiling: It was...
Hi Tom,
I reinstalled KMotion4.35d and kept the old files excepted for KflopToKMotionCNCFunctions that is brand new, and effectively no TMP # defined.
...
Hi Tom,
Thanks for the quick reply.
Strange that the file doesn't compile, on my computer it does and the TMP value is defined as 3 in "KflopToKMotionCNCFunctions.c"
Because it's defined in it...
Hello Tom,
The code I have sent is exactly the one I've compiled.
To simplify the debugging I'm working on the code part that receives the data to induce motion and results in positioning the...
Hi Tom,
I implemented the changes, I still get one error with TI compiler =>"C:\KMotion435d\C Programs\1.38_Compare_M6_test.c", line 86: error: identifier "VirtualBitsEx" is undefined
...
Hello Tom,
I found what was wrong with my code => I used the same declarations at the beginning of my files and one was cancelling the other due to variables declarations conflicts.
Anyway,...
Hello Tom,
Thanks for the feedback.
I changed the code like you suggested and have been closing some faults.
Actually, when I'm compiling with Cpp check I read these notifications of errors...
Hi Tom,
Thanks for our answers and help to clarify many issues.
In between I've cleaned the code but still have some issues like this:
" C Programs\1.33_Compare_M6_test.c:316: ';' expected "...
Hello,
It's been a while since I've been involved into C programming and I can't find what's wrong with my code...
If somebody would have a look at the attached file it would be great!
...
Hi Brad,
I actually have P: 4 I: 0.032 D: 35, the values aren't the same on each axis but they are all around this set of values.
But this setup is based on large bandwidth with low following...
Hi Brad,
I'm using a similar system with Kmotion+Kanalog.
I have used the method recommended by tom and made many tests to have a first satisfactory result. As you did I concentrated my efforts...
Hello,
I received the answer about Elmo converter.
First, the German manager told me that it's no more available. Maybe there's some old stock because I received a quote from France and they...
Hello Oleks,
I know well granite devices drives I personally have 3 of them.
But in fact we are discussing about pulse and direction signals conversion to differential quadrature signals.
Maybe...
Hello,
Maybe that could be a good approach.
This site also contains interesting informations, have a look.
http://pico-systems.com/stepdir.html
http://www.jvl.dk/default.asp?Action=Details&Item=358
http://jvl.dk/files/pdf/ld051gb.pdf
Hello,
I'm on the way to find something. I don't know when but yesterday I found something related in texas instruments documentation. The problem is: I was on a extrnal PC and I cannot retrieve...
Update about pulse dir converter.
I asked several days ago for a quote and delay at various distributors in Belgium and France. Actually these bloody peoples aren't able yet to give me a quote...
I called the local distributor and as I expected he doesn't know anything about that.
He's going to ask about and give me prices and delays.
For info: http://www.atb-automation.be/index_F.html...
It's quite easy to not blow the motor, I was obliged to choose the motor type and all the matching values are setup immediately, there's only a real setup when you reach the later panes, it begins...
For sure the operational speed of the actual setup is quite below... and edge effect will rise with frequency.Definitly I'll try to get a Elmomc but there's stil a major problem to work at full...
I do not have a scope, It's a future buy, but first ballscrews :)
Then maybe the flat cyclo reducer for the head, quite expensive....+/- 1800€
And later the scope, but I need one for my bikes...
A nice day :)
It works perfectly well
I did the setup as you mentioned and I'm able to rotate the motor from Mach3
For sure it's quite slow but it doesn't matter (there's a sine encoder with 2M...
I've been to the electronics shop and I'll test the setup with resistor and capa as you described earlier. Maybe it'll work.
Nice job!
I'll ask in Germany for prices. If you can get a quote from US, maybe cheaper.
Time to sleep...
http://www.elmomc.com/support/manuals/PL_UG_1102.pdf
I found that in the G101 Manual (same as G100)
Quite interesting....
I'll try to findout how to!
Analog to Digital Converter differential or single-ended mode
(bit 4)
The G-REX has the...
I agree with you about connector C8. It's why I first search to work with C8.
Maybe Should I make a new Thread about my project. I'll work on that, with pictures, drawings, explanations etc...
I...
I don't think so, but at least it should be the same than a BB, so the setup you explained should work. If not I think I'm gonna explore the OP Amp way for 24V signals trough C3 connector. With the...
Ok, thaks for the fast answer.
I was asking about because I was searching how to communicate with the C8. Now I must buy small capa. to test.
I'll post when done, maybe with a picture.
I'll...
Hello,
I actually have bought a Servostar Cd and would like to use the RS232 C8 connector to use with Mach3.
I Would like to first use my CNC4PC BB to test and setup the drive.
Should I make...
Hi Clockwork,
Not the best place to talk about that but you have a nice set of machines.
Beautiful design, really.
J.