Search:

Hi Code, yea I was thinking the same the pad by J16 micro chip, but as I was looking at the board again, the pads on the left on the edge of the board might be pads also for it, I don't have my...

HI Code, see if these pics work for ya. They are both complete top and bottom of the VFD controller board that sits on top of the power supply in the box.

Hi Code, well from what I'm seeing, windom46 is trying to help pippo73 they are from italy, windom46 has the E750 controller and pippo73 has the E1500 which is what I have, but in 110v-120v input,...

Hi Coldte, I just wanted you to see what we made the other day. Used artcam software to create it, daughter-in-law painted it. Its my family crest, so please just call me, my lord,from now on, lol...

Thanks windom , good post,

CHIMERA1960

Window, Hi Hey could you translate your post to English, I can't get translator to work too read your post to help you, could you translate it and repost it? Be glad to help if I can.

Thanks...

Hi power, well I took the sticker off and found no numbers that I can see it looks blank same as some of the other chips on this board I have which is a bitstream same pictured, I dumped it and...

Hi Everyone, I just wanted to add this manual also applies to the 110v version 6040 cnc machine, so you can use these VFD settings to setup your spindle motor. Also use the rpm display on your panel...

Hey cold, well it sounds like your breakout board is not talking to the computer intern not talking to mach3, so boot me a pm with your email, be glad to give you a copy of the rnrmotion driver which...

Well, you did good, you learned, and you produced, and you and your machine, are both still up and running, that's the point, you now know what a touch plate is, you know a hell of a lot more now...

Well it sounds like you need to stop at this point and do some homework, before you continue, no pun intended, there are some things you need to learn and understand before you continue. Again u-tube...

Well that would explain why I couldn't open the stepper chart I don't have excel on my LG tablet, but I'm wondering why the bit stopped in the middle of a cut command, did you look at the gcodes too...

I cant open your attachment I even registered on the site and still can't get the calculator, I would use a dial indicator and mach3 stepper calculator, you cant get it any better then that, I know...

Well water for cooling is fine, since the spindle housing is a high, chrome, nickle, low carbon content stainless steel tooling grade, from a glance. I here guys are using the mix with rust inhibater...

That's great too hear, I give most of the credit too gmungas with that awesome write up, hey did you get the manual? Get it printed out and put it in a safe place it has good data in it. Also make...

Well the reason you see the 50.00 flashing is because you reset the VFD to factory settings. By the way did you download the prt-e1500w translated manual from this site go find it and look it over, I...

Well the picture is identical to the controller I have, and the settings listed here are only the basics, in other words to get you started, they will get your machine running without burning it up...

Greg,
Well I have been using your input data you have listed, it works for the most part, I would go with it, correctly their good numbers, I have a couple of bugs I have to workout, yes the...

Hi Everyone, This is the Model CNC 6040 220v-380v PRT-E1500W controller VFD Manual translated to English,

Its the best I can do without redoing the entire manual.

Good luck
ENJOY
CHIMERA1960

Here try these codes, let me know how it works out, its what I get from my supplier, Her name is Rose, and she doesn't work weekends lol this is why I came here. You might be able to reprogram your...

Too answer your question, Have been since I received it three weeks ago, I am here because, I have been trying to get the correct documents but I don't think they have what we're looking for? The...

HI, I have the same board in my machine I just bought and I had no drivers either, But I found the correct one, so give me your email address and Ill send you a copy.

Later Chris AKACHIMERA1960

WoW Awesome write up, but from what I see your spot on, only way to confirm without a doubt is with the manual by the way, the model no. For the VFD is "FD-A-V2" that's from the circuit board it...

As Soon as I get The manual for the 110v I will post it for all to use, I Just don't know how long its gonna take, I asked them to translate the to English. So Im hoping not too long, I cant get my...

Hi here you go I got the exact same card in my controller here is the doll driver you need I made a copy.Not sure where it gets placed my guess windows doll folder, later Chimera1960

Hi Mate, I have the same type of machine, with the same box, I take it yours is 220v seeing your overseas from me here in the states, Too me it sounds like you didn't get the motor tuning setup...

Hi A-Camera will this help, I opened my controller box and got a pic of the vfd board and on it there is a number that says FD-A-V2 date 7/12/2016 110v AC is what system i have not 220v like most of...

Please make share you state what the freq Hz motor you have and which voltage you are using please, I made the mistake of downloading the English version of the 6040 with the 1.5kw motor but its was...

HI Everyone, I'm new also and Yes I too bought the Dreaded 6040 1500w CnC from CNCNET from ebay and its really a solid machine frame made of steel, heavy also which I like, But I too didn't get the...