Whereabouts in North America?
Type: Posts; User: WayneHill
Whereabouts in North America?
Where abouts in SW Michigan? I am in Jackson.
Thirteen years? Wow. The post popped up in the headers the other day. Thought it was new. My bad.
Sounds like an interesting project. Be sure to secure the cogs on the AMT102. There is a hint of backlash between the plastic cogs that could give false readings.
The AMT102 are used on the shaft of a DC motor. I do not see any delays. It runs five start acme threads reduced down 1:2 at the motor. Anti-backlash nuts. It's fast.
Have you ever tried cold form taps on a lathe?
Drill as deep as the print allows. Stop the machine before tapping to slap some tap honey on the tap and continue without coolant on the tap...
To reduce the racking from the center screw, add an 'H' cable configuration to the setup. The V-bearings are double stacked on both sides. Works great on my setup.
I use AMT102 encoders instead of US Digital.
https://www.digikey.com/product-detail/en/cui-inc/AMT102-V/102-1307-ND/827015
The PPR can be set on the chip. They have been trouble free since...
Make a DIY cooler from an old refrigerator on Craigslist. Punch holes through the front door to avoid puncturing the coolant lines. (Not making that mistake again). Have the lines go into a...
Your widow will be spending your profits on this beryllium toxic poison project.
Yes:
Advance Turning – Leaders in Precision Components
They make hose fittings for aerospace to ISO/QA standards. Would you trust hose fittings made in China on the jet you are flying on?
My program has come a long way. It has been changed to include a laser highlighting routine.
Attached is the latest version update pictures. Much better than the old Microcarve program I use to...
Yes. Software can be expensive. Especially high end CAD/CAM software.
I have Vectric Aspire 9.0. It does not do everything. My program can skip pixels in either X or Y to create faster 3D profile programs. Time is money. It can cut with the wood grain in one...
Here is the proof of concept for the faster roughing routine. It cut this 4X6 inch profile in 22 minutes on the first go round. Hoping to improve the quality of the tool path by using a different...
Hi All,
I am working on a custom software program to create tool paths from pictures. The other programs out there that do the same type of tool paths do not address the issues I have with them....
60. Programmed NC machines using paper tape from a friden flexowriter for the EIA machines and a teletype model 33 for the ASCII machines. Lots of chad on the programming floor.
You are welcome. It seems a lifetime ago the program was written. Looks like it still stands up.
You red tag and lock out the machine as unsafe to operate until it is properly fixed and approved for safe operation. Do you not value your employees safety?
There are contributes on this thread there that are taking this project to a higher level. My participation on this conversion development has ended. Onward to other projects.
Thank you,
Wayne
abd,
See post #15
Wayne
FYI.
My web site is no longer in use. My Web Host kept F****** up on security and was constantly hacked by php script kiddies.
Bye Bye
iamyourhost.com
Good riddens.
Wayne
D.P.
Here is your sample output.
Thank you,
Wayne
Thank you George!
It is back up again. Evil Hackers keep getting into the Host and pilfering the client web sites. Anybody have a suggestion for a hack proof Web host I can use ? This has...
Hi All,
My Web Site is back up.
Saw this today!
CNN.com - Breaking News, U.S., World, Weather, Entertainment & Video News
The Z filter will keep the Z positions within the Min/Max of the settings. The website will be updated to clear up this statment.
W
Vogavt,
I hosed my own website this time! It's back up.
The web host said the hacker installed hidden directories on the site that launched the other web site. I will be rotating my password...
DoorKnob:
It is hosted at Portal Home - iamyourhost.com.
They admit they had been hacked through a software flaw in a cart program on the host. It was nothing that I had done to expose any...
Mat,
This is what I think happened. My web site was registered as
codemangler.com
www in front of it defaulted to my web site. Something happen on the internet where www class of web site...