Thanks
Will check this out.
Type: Posts; User: swealf
Thanks
Will check this out.
They look good but have not measured them.
The circuit board looks good both front and back nothing burned and nothing that seems to have gone hot.
480926480928480930
Here are some more pictures.
480914480916480918480920480922480914480924
Has taken a picture of the engine.
And picture of the explanation on A110 alarm and AL-12 on printed circuit board.
Has checked all cables and...
480826480828
Really need help.
Has replaced IGBT with new ones.
Have measured the diodes they are ok.
Post pictures so you can see what I change to new.
Still gets the same alarm.
Is there...
Hello
What do you mean by IGBT?
What is it.
480050480052480054480056480058480060
Uploads some pictures from the control cabinet.
A green LED lights up and the digital is set to 00000
then the machine is running.
But as soon as you...
Have tried to start forwards and backwards
Same alarm.
The phases are good.
The motor is 100% ok. Had an electrician here who measured phases and motor.
What can it be on the drive board?
...
Could there be a fault on the printed circuit board?
The card looks good, no burned components, everything looks very good.
But there can still be something wrong with it.
Hi I have waited from 10min to several hours before I have to start the machine and always the same result, as soon as I start the spindle the alarm comes.
I have one Okuma LB15 year 1998 with OSP 5000 L-G.
When i was using the machine and did the first cut it went to deep in the material so the machine stopped imidiatly the spindle stopped and the...
all the machine settings looks fine, exept the x-axis is wrong with about 30mm on the diameter. We dont know which parameter you can change that on. so we are wondering if anyone know which one?
Hi
We have a Taiwan Takisawa 110 lathe with system fanuc series 21i-TA
the issue with it now is that when we changed the batteries in the machine, the machine zero point has been moved
how do...
Hey!
We have a problem with the NC/PLC not getting a connection when we restart the machine it says that the system might be corrupt.
when checking diagnos in the machine it says...
Hi
It was the Y axis motor,it was a short circuit in the motor.
We have changed the y axis motor and the machine is working.
Hi, Only the Y axis is fault.
And now we get a new Alarm 25201 Axis %1 drive fault.
I think my system is dying. so maybe it is to replace the CCU?
Hello all
We have a Unisign Universe 4 with sinumerik 810D CNC milling machine.
We get the alarm 26100 Y-axis sign of life missing. we have tried to restart the machine and it does not help us...
Hello
Im wondering what is the difference between this two :
Heidenhain TNC 150B
Heidenhain TNC 150P
Which one of this 2 are the latest one?
Hello
When we start up the machine, it only want to reboot all the time. We got this message first ERROR: Unable to control A20 line! XMS Driver not installed.
this is followed by. Warning:...
Hi
There is no Physical differences so its probably a brake or an encoder option as you say.Thank you for you help
Hello
i got one Siemens 1HU 3056-0AF01.
The seller has one Siemens 1HU 3056-0AF01-Z
Im wondering what is the difference between them, what does the letter Z means?
When i shell get the reference points on each axis. The machine takes the Z axis to the ref.point and its alright, But when it is going to take the Y axis ref.point it goes there but then stands...
Its our third CNC but the first with this model of Fanuc. We have had manual guide I in the other lathes. We have solved the problem. Our Turret was not in the right postition but we did the...
First when i start the program it goes G0 T0101 and Changes the tool. But when it suppose to go to G97 S100 it gets the alarm and wont run. But when i then start the program at G97 the program runs...
Okey we have tried it separately with M,S and T command. And they work but just one block, it wont change to the next block. Thats when the alarm comes up. Does the B in the alarm stand for block...
The lathe is a Takisawa Ex-110 cnc from year 2001 with Fanu21i-T.And we get the Alarm 1022 M.S.T.B sgn Are not completed. What does it mean?
I get Alarm 1022 M.S.T.B sgn Are not completed. What does it mean?
Yes it was the turret thank you for the help :)
Takisawa E-110
we get an alarm 300 APC: 3 AXIS NEED ZRN
We have changed the parameters 1250. 1401. 1860. 1861. 5002. 5003. after the list of parameters that came with the machine when it was...
okey we have solved it thanks for the help :)