New link to Every Document I have accumulated on Daewoo/Doosan/DN Solutions machines: https://drive.google.com/drive/folders/1QnkuyMa7j2OjuouZG3VbbdjfJUmWUN6_?usp=drive_link
I add items whenever I...
Type: Posts; User: dhardt
New link to Every Document I have accumulated on Daewoo/Doosan/DN Solutions machines: https://drive.google.com/drive/folders/1QnkuyMa7j2OjuouZG3VbbdjfJUmWUN6_?usp=drive_link
I add items whenever I...
[QUOTE=servtech;2538690]
I believe we are in agreement. Indexing rotation crash will not damage/slip a curvic.
Clamped curvic crash absolutely will damage/slip a curvic.
When I read his...
[QUOTE=servtech;2538690]
Indexing impact will not damage curvic, because curvic disengaged to allow index.
Used K5.4 = 1 to allow free rotation. Unjam. Align and alter back to K5.4 = 0
An index table is purposely built with a lot of backlash, because the curvic teeth lock together and give the accuracy.
If the locked position is "all over the place" the problem is the curvic is...
Unfortunately no. But sections of the Puma 240M, and sections of the puma 2100SY Manuals can give procedural insight to the similar components. Just compare the part drawing in the relevant manual to...
Incremental position coder type
1850 grid shift tunes the location from dog to a potential 4096+ or 4096- and 1240 is what that selected position is going to be called.
Absolute position coder...
This link is valid for 7 days: https://www.dropbox.com/t/woYju2sHzX4qimSw
Manual for SMW SpaceSaver 2100 Series BarFeed
Don't you love it when someone asks for help in a Private message, but has their setting made to not allow replies...
Errors
The following errors occurred with your submission
Johnny-Don has...
The blue book in the back of the machine has the "how it left Korea parameters"
Other machines...have other options. The backups match the machine and are not "swappable".
What is the serial number?
I don't have anything that old, but some newer models are procedurally comparable to the older machines.
When I worked at Doosan, I created a few videos. They might help someone out there...
https://www.youtube.com/c/doosantechnician
To anyone reading this:
This links to an active page, the manuals get added to it, so the link should remain "Up-to-date"
these should cover the similar machine...
Are you wanting it to work, or just wanting to bypass it?
I can help with either. One is more involved and requires some skill from you, while bypassing it is easy.
SMW Systems is still in business under the name ATS Systems 800 423 4651 will still reach them for technical support.
from the 64 series:
They might be the same. It was easier to provide both, than to compare/contrast...
A meldas to SMW interface from the 52 series of controls
The SMW 2003 has some orange relays on the mother board. They have manual activation "flip-up" levers on them.
One of them is K2: This should be the Spacesaver OK signal.
If wired correctly, even...
There is an area of interaction that the compound axis configuration of Y axis needs to be in to automatically home.
Sometimes there is a keep relay that will allow a more roomy approach.
If your...
Norm,
We covered a lot over the phone, but I'll summarize here for any passerby that reads this.
Using K5.4 when in the appropriate Upper/Lower selection
=1 causes unclamp
align closely, but not...
It is a 6 (H68 means matching Korean safety standards,
and suitable for a 16 or 18 Type control)
I will have access next week.
Thank you, but I no longer work for Doosan...
is the interference zone's parameters properly set?
Can you jog the B to the location desired while using the handwheel?
This is not recommended.
A cold machine has greased bearings coated in grease that is not evenly distributed...warm grease was slowly pulled downward by gravity the last time that motion was turned...
M250 would put it into MAINTENANCE MODE
Please note: on some machines this keep relay is K12.4, others it is K64.4
This relay can only correct the issue if the CAHP.M (changer arm home position. monitor) is a 1 as well as THOMEI.M (tool...
I no longer work for Doosan, but next week I will start a new job with similar access to Doosan information.
What is the machine's serial number? (found on the placard, located near the main power...
The instructions are on the servo turret parameter page. Three quarters of the way through the BLUE BOOK.
The BLUE BOOK is in a pocket welded into the inside of the electrical cabinet door.
Estop from barfeed, and likely a keep Relay that says to look for the barfeed logic.