Search:

We replaced servo driver with alarm 014, we will have to fix it but we never done it.
About vibrations on axes we replaced plastic coupling on servo motor X, and used small shims 0.10mm on coupling...

what's your controller ? EX or MK
Could you explain exactely your problem (error codes?)

Normal machining IP00xx worked, TMpulse machining IP12xx neither IP22xx "mach stop due to schort circuit"
There was not really a short circuit, the smalest power resistor on HMP unit was overheated,...

correction:
Relay BO 01 turn on when G01 Machining ENT ( Mach ON).
SLO 01 on RLD25 the 7 segments Led display completely unlight.
When disconnecting OPT fiber 2 it indicate F1.
Machining...

Exactely, floppy 2.1 was corrupted thanks a lot.
System restarted, that's OK.
Machine cut with Normal machining (IP 0xxx) but show error massage "machining stop due to short circuit" with TMpulse...

could you ask spring's manufacturers in UK ?

Dear Friends,

A lot of EDM Sodick operators said, System loading stops on step 52 with Sys2Sys3 error.
I never red the solution. Of course when someone found the answer, no reason to continuing...

how did you resolve this error?
I have the same on my A535 MK25?
Guy

It miss cabinet air circulation when it's very hot.
CPU was a little bit unplugged on IO/07 board.
I removed board, put it on a flat table and pressed firmly on CPU, it plug on socket much better....

Since 1989 We are working with Sodick machines sink and wire edm.
We have now an old A535MK25 but we worked with A500 MK21 few years ago. Did you found a manual for that. What would you especially...

How the dielectric chill on this machine ?
Does water coolant circuit flow?
Or does the cooler work?
Does electro-valves opened?

E064 error 64 has occured
(SH) press ack persist !
I tried to reboot directely PC's machine.
System loading progress from 11 to 48 and show yellow message Sys2/Sys3.
Would it be hasardous...

I burned this driver when I unplug the driver with power on.
Error message 014 appear on display.
I found a new one by EDM-DEUTSCHLAND.
Only few days delivery time about 1750.00 euro.
One...

It's not the first time. Just after system has loaded, those messages appears on my sodick A535 MK25.
E064 error 64 has occured (SH) press ACK
or
E065 error message 65 has occured (63) press ACK...

Mark 21 conditions table is similar with MK IX and XI. you can test a square hole cutting with steel cutting conditions and measure the square you have cut.
I can send you MK25 cupper and aluminium...

M00 is a halt command, how did your command line written on your program?
Is the first time you use M00 command?

I had few questions last 08.17.07 about ac servo motor and driver but no answer.
I know now, those items are special custom made by Minas and data sheets not available for users. Motor axis X...

I search user manual about panasonic ac servo and driver.
It's a motor 200V 100W MFA010LDMNSD and a driver DV85010LDMBS on a sodick wire cut machine.X motor axis vibrate a lot and I kill Y driver...