I have a Mori Seiki mv-60 with fanuc 6m B controls. We had the 4th axis on it up and running for a long time. Now the parameters erased and the cnc is not recognizing the 4th axis. I know all the...
Type: Posts; User: cSpampinato
I have a Mori Seiki mv-60 with fanuc 6m B controls. We had the 4th axis on it up and running for a long time. Now the parameters erased and the cnc is not recognizing the 4th axis. I know all the...
Hello! In the shop where I work we have a puma 400/L that seems to be cutting off center. Whenever we face a solid piece, the insert chips towards the center of the part. Also, trying to drill on...
Pretty much like the title says, one of our lathes is losing count of what tool it is calling up. The machine was off a few weeks, and when we turned it on earlier today, we were getting alarm no....
We have a Hyundai 700LM here at the shop were I work at. Its the first time I use one of these. It has an x axis, z axis, and a c axis as well as live tooling (which is the new thing about it). I...
I cant find param. O108. It jumps from N parameters to Q parameters. Any ideas?
Please disregard the 'NO TOOL IN MAGAZINE' alarm on the picture. I took care of that but still the other alarm comes up at the same time
I recently started working on a Mazak horizontal mill with M-32 controls. The first project that I'm trying to run on it requires a .125" drill sticking out about 8" to drill 1" of material. To do...
Ok, we got the problem fixed. The reason why we couldn't use Mazatrol or run the program was because there was a parameter that got turned on when the machine was reformatted and we had to turn it...
I am using G54, G43, & H1 in the program and I did set X0 & Y0 as well as tool 1 offset via the EIA info. option from the start. I am about to go back outside to confirm that everything is still set....
background info:
In our shop, we have a horizontal mill (Mazak H500/50 with M-32 Mazatrol controls) that was bought at an auction a couple of years ago. We haven't messed with it until recently...
Is there a formula to figure out how much the lead of a thread will shift by if I cut it with a certain spindle speed, and then slow down or pick up the speed?
Example: I cut a thread on a CNC...
We have 2 Mori Seiki mills at our shop with 6M controls. One of them we can use our work offsets (g54 g55 g56...), on the other one, the work offsets are not respected. I wanted to see if there is a...
I have a used Mori Seiki vertical cnc mill with fanuc 6M controls. I have the operator's and maintenance manual, but the machine did not come with the parameters manual. Anyone know how I could get a...
I've had the same problem on a Hyundai 400L & 700LA. The system versions are 21i and 32i. What woks for me now is:
-plug card in computer
-drag & drop program in the card's folder
-plug card in...
Ok, here is a link to the macro that I altered yesterday.
http://s10.postimage.org/46980tovt/MACRO.jpg
Yesterday I found a pdf that explains macro programming. I think it came from a fanuc...
What a life saver! Removing that Z move saves us 3 sec from a ~ 5 min operation. The accumulated time saved will be huge! Thanks a lot. Now the only thing I changed was the unnecessary movement on Z,...
We have a 32i series and a 21i series CNC and are trying to access a macro designed to move the machine's tailstock. The program number is O9023. The problem is that I cannot access it on edit to...
I will look in the parameter manual that came with the machine if we decide to switch to one line G76 programming. In the mean time I will use the information you provided me with to run 2 line G76...
This is so helpful, I appreciate it a lot. But how can I specify between single edge cutting and alternating edge cutting?
I have a question regarding the G76 threading feature for a 21i version of Fanuc. On the first G76 line, the P-value has 6-digits. The first 2 digits are the number of times that the finish pass will...
Turning on D3.7 worked like a charm. I went ahead and turned on D3.4 as well. That one increased the manual rapid when its at 100%. Thanks for the help!
The doors are open most of the time, but we tricked the sensors into thinking that the doors are always closed.
We have a SKT-700L running on fanuc 21-i controls. I wanted to see if we could speed up the rapid travel speed when using jog. Even if I put the rapid travel at 100%, the turret moves too slow. When...
You guys suck. Can't ever get any help!
As soon as I turn on the mill, and the hydraulic pump begins working, an alarm comes up that reads "Magazine Driver Malf. 212". We cannot get the magazine to move at all. Not even with the manual...
True, the dwell code can be easily adjusted by the machine operator during a set up. Having various operators going into the machine parameters and messing with them could prove be a bad idea.
Thank you for your reply, I figured it out earlier today by searching through the threads. I ended up using G04 for the dwell. Now if i want to change the delay time in the parameters, which...
I'm using a puma 700L lathe with fanuc 21i TB series on it. I wrote a program that automatically opens up steady rest #1 and closes steady rest #2 right after, then the program is set to continue...
Also, i am using an insert with a .031 nose radius
Ok, this is what i've been practicing on. I started off at the radius on the nose of the part and thats where I've been stuck. By my calculations, the point diameter at the nose is 2.4544. I've also...