Search:

Hello Dieter

It sounds like a broken sensor or proximity switch which passes on the position of the tool magazine to the controller.
Its easily repaired by yourself- I had the problem before!

Hello Dieter

Did you have a look in the pocket table if the tools are in the correct position?
Maybe that could be the reason for your problem.

Hello

I think that there are good reasons why some cycles are locked. If these are options then of course you can unlock them by paying for them.

It best if you ask the machine manufacturer-...

Hallo knezink
I was thinking about doing a correspondence course a while ago too. I also opened a forum and the answers I received where really helpful. However I did not do it in the end.
My...

@ hapo
If you add your comment then at least write something useful to find a solution to the given problem. It ‘s no question that a 810M from Siemens can’t be compared to a iTNC530 from...

Hello,

To add a BLK Form afterwards , you need to use the special functions of the controller. You find it with the 530 when you click Sk on the left side and then scroll.
Its actually quite easy.

Hello

I know tr30x6 from my period of training. We used to turn those threads with self-cut steels. Therefore, we used a cranked square steel bar with a square hole that was cross to the axis with...

Hello

I have seen several times that the controller makes trouble.
It showed error messages which were completely illogical or it just stopped to have a big break.

The problems often occurred...

Hello dickben
I have not tried yet, but I think it would also work with the demo version of the programming station.
Simply enter it like on the machine , save and return to the machine. If it...

Hello Paul

What language is your documentation in and how comprehensive is it?
Maybe you could show it here in the forum so that we would help with the translation?

Greetings
Farmer

Or at eBay…

There’s a supplier who offers lots of monitors for CNC.

Just search

Greetings farmer

Hello jarhead

I’m curious about it. It would be great if you’d really make it available to me.

Greetings, farmer

That’s the way I’d also make it.

Greetings farmer

Only a 10 meters long monitor will help.
No, all joking aside. You can zoom a part of graphics after simulation cycle. I don’t know the hot keys at the moment. Then assume the selection and start...

Hi people

Is it possible to make a thread with a thread milling cutter on the controller DataPilot 4290V7.1?
Is there a special cycle therefore like one for the controller iTNC530 or can one be...

Hello schischi01

What screen resolution do you have? It could be the problem.

Regards, farmer

Yes, there’s a possibility or a tool for recovering of deleted programs. It’s called: retyping!! :))

Regards, farmer

Try at Heidenhain, they have so many that they even sell them.

Hello Benelli

Click the site

http://winnetou.lcd.lu/~atelier/index.html

There’re a couple of beautiful pictures there

farmer

Hello Rene

Isn’t there anything about it in your manual guide?
If not, ask the machine manufacturer. They know the answer 100%

Regards, farmer

Hello Alex

I can’t understand what you’d like to know. Can you explain more exactly?

Hello
That’s right. You can receive Cycle Design only at Heidenhain if you take part in the training. It costs about 500 euro.

Regards, farmer

Hello Metall
Unfortunately I don’t know CAM.
Can’t you input it via your machine?
The most of controllers have a cycle for such cases. If you can’t, just write what controller you have. It can...

Hello Fräsler

This function depends on manufacturer. It’s M54 at one manufacturer, M68 at another one… We make it with M81/80 at our Hedelius.
You should better ask the machine manufacturer.
...

Just try that

Hello UPler

Truth be told, I find your way of proceeding very heavy-handed. I would suggest to write in as follows:
TOOL CALL 1 Z S1234; Anbohrer 8
CYCL DEF 200 BOHREN ~
Q200=+2...

Hello

If I can do my bit, I’m in. I have a machine with two desks and an additional A-axis.
I’m not averse to learning this as well.

Regards
Farmer