Search:

i am looking into buying the redsail m900 100 watt reci tube. does anyone have this machine or any thoughts on redsail. i would like to speak with someone in the states who is using this...

heavycnc,

how is your build going? i keep checking on new pictures and up dates. when you get a chance i would love to see the updates.

thanks
mark

my machine is 66 inches wide and 160 inches long. i have about 6 inches of travel on the z axis. The shopbot control system works great, and at the time i knew how to operate it. I was afraid i...

awesome, i did the similar setup a couple years ago. The hardest part of the build for me was taking my time on the build and not wanting to get it done quickly to start making something with it. ...

if you have the time and knowledge to built the base table(x) and y and z axis, do what i did and buy the control box and motors from shopbot and mount onto your design. You can build a much...

Confucius should have listened to his mom more. "if you don't have anything nice to say, then don't say anything"

keling,

on ebay your 6 hp spindle has Bearing Type: 2×VEX35 1×VEX25 bearing by snfa

my spindle also has this bearinng. Is this a good quality bearing? I hope so.

thanks

Tigertec ask for david slowiski

715-577-4300
715-723-7647

XingChen brand http://xcspindle.com/


Rabbit brand http://spindle.diytrade.com/sdp/613434/4/pd-3165443/5714585.html

http://chinaspindle.com/


Here are the other brands...

I have the Sing Chen 3.3 hp . it works great. no problems. It has been up and running for about 2 months. very quiet. I would suggest to get a pump/chiller to go with the water cooled spindle. ...

here is a link for a thermaltake flow tx plux flow meter with temperature indicator cl-w0138 $30

it is 12 volts i got it before i got the chiller with temperature gauge and alarms

...

4 wires, 3 plus a ground

i used a 12awg 4 wires shielded


i attached the ground and the shield to the spindle and vfd



here is my number 757-288-6256 call me if you have a...

http://s465.photobucket.com/albums/rr12/taylormadewood/?action=view&current=Picture602.jpg

here is link for the chiller

i used 3/8 tubing and a water chiller made to go with the spindle. it has a pump , tank and fan in one unit. everything is a closed system. even has a temp gauge and alarms for no flow.

I installed a 3.3 hp auto changer on my cnc. it works great. I brought a water chiller pump also with the spindle. much better than trying to make it.
very quiet and smooth running. The...

First time posting, but look at the forum daily. I decided to try and built a 5' by 14' . Just finish it up (over 2 years to built). It works and runs well. I used linear rail on all axis,...