GENTLE PEOPLE , GENTLE PEOPLE
It is ok to "make it work" , it is ok to make it right , it is Always "best practice" to make it right.
As a wise man once said " make it dirty, make it work if...
Type: Posts; User: thaisurplus
GENTLE PEOPLE , GENTLE PEOPLE
It is ok to "make it work" , it is ok to make it right , it is Always "best practice" to make it right.
As a wise man once said " make it dirty, make it work if...
https://www.digikey.com/product-detail/en/comair-rotron/19031660A/CR310-ND/256078
obsolete item but this page lists the specs for you to find replacement
dunno if Denford is still selling...
hi there
your board saw high ac voltage, to pop every ic, thinking you got hit with lightning with that kind of damage.
suggest you check power supply output for acv and dcv , 0v to power and...
please take a look at my listings, all new top shelf goodies. https://www.ebay.com/sch/wealllovetheking/m.html?_nkw=&_armrs=1&_ipg=&_from=
142459877041
142459877043
142476253019 NEW...
this machine cost over 100,000 bucks 5 years ago!
142474211852 ON EBAY
Clause
from what you are describing:
double column (bridge) mill ( since i have not seen a cnc single column)
...
i would look at the fixturing
whatever they are doing they are consistent !
why do i think they are waterjet cutting this ??? if they are water jet cutting they are "piercing" to the...
james
i check on your machine and quick-read the manual. no hydraulics but tailstock is air operated
it is a motor making the noise
your machine has a few:
way lube automatic oiler
coolant...
noise is bad
use good shielding and/or ferrites
there is more than one way to skin a cat, smoke em if you got em
guys
different hammers for different jobs
lead hammer is the original "dead blow" hammer , it will Flow at the point of impact and impart all of the energy into what your hitting. lack of...
cobra
just from your explanation:
1-my gut first thing would be to check servo parameters
2-check servo set screws (servo mechanics), physical connections
3- try x axis 4 pass groove , y axis...
james
sounds like a fan with a broken blade, could be a pump say hydraulic pump that ****-the-bed.
what is and isnt working?
machine can run? tool changes possible?
i am known as the...
bloke
same cabinet and same wiring, just an extra pair of wires at the I/O and parameter 0 or 1, and an autolock switch.
hurco wants you to believe they can only help, i only need them to to do...
todd
firstly , re seat all the connections carefully, make sure 24v power connectors are gut-n-snug....
grab a pc monitor (vga) and plug it into the computer. hurco uses windows platform...
if your hogging hard materials you need more flutes
if your chips are the same color as your part your not taking enough material out and all the heat is going in your tool
if your chips are...
I have a Hurco VMX42 for sale, details are on ebay.
my machines made 3d parts
shane
My understanding from your explanation of the plan, I have a suggestion.
you apparently do not need the rotary to spin your part, just to spin the "magazine" since the operator must load...
Please check this out!
HURCO VMX42 MILL 12k SPINDLE CNC VMC 10/2010 LOW HOURS 3D MACHINING CENTER | eBay
I work on both of these machines Haas and Hurco.
Hurco is a more robust machine, has good conversational programming and are just built better. they can take any program, and you can program your...
hello all
i am a machine lover, all kinds any color or style. master auto mechanic and just too many hats i wear. out of South Florida.
Moved to Thailand and fell into rebuilding and repairing...