The formula for thin wall pressure vessels is stress= (pressure * Radius)/(2 * Thickness) This formula works for either internal pressures where the stress is in tension or external pressures then...
Type: Posts; User: Ringleboy26
The formula for thin wall pressure vessels is stress= (pressure * Radius)/(2 * Thickness) This formula works for either internal pressures where the stress is in tension or external pressures then...
I just began retrofitting a clausing 1550 n/c lathe. I purchased the lathe without a control, but was in working order when the control was removed. From the looks of the manuals that came with the...
Thanks for the help al. By chance I do have the wiring for this encoder so it will not be hard to wire to the gecko. I looked thru the g320 manual and I could not find any info on the pull-up...
I need some help identifing a encoder that is used on a cnc lathe. The encoder is a anilam model no L25G-750-ABZ-7406R-LED-SPT02-S. Here is a photo of the encoder...
Smarbaga thanks for the input, im going to try to keep the dc motor.
What kind of drive would you recommend for this motor? Would this drive work for this motor?...
I am currently working on a retrofit of a Clausing 1440 cnc lathe. I got the lathe with no control so I do not know how the spindle motor was run. The previous owner took the variable speed pulleys...
There is a company in my town that is specialized in making cnc router bits. Their website is www.vortextool.com. From what I hear it is some of the best woodcutting tools around.
Rwwink that sounds like a great way to make a extended bit. What kind of silver solder did you use? Also do you know a place that sells Wire gauge sized drill rod?
I think ill take the route of...
I need to make a 5.625" #43 drill. My first question is where I can purchase some #43 drill rod?
My plan is to grind a small groove on the end of the drill, and a tounge shape on the drill rod. ...
I built a sweet go-kart type vehicle in college. I was the team captian for the during the 2003 season. It had 20 inches of independent travel front and back. We could only put a 10 stock briggs...
What I would use is cone crusher epoxy. I help a friend of mine replace a liner on his cone crusher, and he used this epoxy to fill all the voids behind the liner. This keeps the liner from breaking...