Search:

So I replaced the power supply with one I had from before and it did the same thing, so from reading similar post I noticed the Y axis for some reason was at the end of its travel and on the limit...

Sorry but yes it is a A2100 control. It does have a Startech in it now with approx 50 hrs on it. I have another one I'll try. Thank you

Running machine everyday for 3 to 4 hrs and it went down one day after about 30 minutes. it gave me the Power Supply Malfunction. I shut it down and started back up and started to align the axes and...

Thank you for replying, I checked the bat tonight and it showed just a little over 3. I touched the back of battery and the little spot of solider just under the bat. Anything else I can try?

In December I keep getting Axes drive ready signal missing. Alarm 39-41. Well that went away and now I keep getting this Realtime timeout. It wont restart till the next day which it will run an hour...

Thank you Mike for your reply. Yes I have a mill, lathe and CNC lathe and NO compressor. I do not have it grounded other than the incoming wiring. Can you direct me on proper grounding. I haven't got...

So I havent been ignoring your post, I started 2 nights ago with a video cam camera for a hour and a half and of course it never kicked out. The next day for 4 1/2 hours even dry running it with no...

just in case you need to know it has the BDS4 drives. after it kicks out the control volts light stays on and the undervolts light comes on a few seconds latter.

When i start the machine within a half hour it kicks out with this alarm 39-41.Turn it off and start it back up it does the same thing. I dont even have to align the axes and it will do it.Any ideal...

Thanks for the info everyone. Since I replaced the PS and started just plugging it in to 110 out let its been doing fine. I believe my problem was the phase converter producing the wild leg and it...

I replaced the PS with an Athens and it seems to be working fine now.

Hi Pete thanks for responding. Its a acramatic 2100, I should have put that in my post. I put another PS in last night and it ran A couple hours fine. I have a few hours of work this weekend so that...

I have an arrow 500, 97 model. I'm having power supply problems in the CPU. Previously I have had to have 3 boards repaired and then the power supply went out. It had been replaced with an Athens...

I have an arrow 500, 97 model. I'm having power supply problems in the CPU. Previously I have had to have 3 boards repaired and then the power supply went out. It had been replaced with an Athens...