Search:

Report
as I was expecting nothing change, EEPROMs have no data inside so Error 95 remains.
So now the only thing I can do is to find on Internet such a Panasonic Serial Interface or any Universal...

well, today i have read both EEproms and i found both empty, nothing was written inside.
Although i made the appropriate transfer to e-bayEEprom and i...

exactly this i am going to do
i will upload Eeprom from the one and download it to the other Eeprom.
like this, i am hoping to achieve compatibility

Also, i tried and this I Connected the Encoder without error95 to the 1207driver and Upload all parameters to myPC ..then plug the E-bay Encoder and download to the 1207driver again the parameres was...

On MFE2500PENX Panasonic Encoder card other than RS485 signals I can get also 4 another signal like U,V,W,Z.
I want to share that when I align U signal with Uphase with my Oscilloscope it...

Drive is in perfect condition. Works well.

No has not Hall Sensor. I have read your Post about Hall Sensor Encoder years ago and I have done the Setup as...

I achieved entry to drive MaDTT1207 via Panaterm Ver3.7 Panasonic Software and also have explored parameters via keypad's drive. I haven't seen the Key Parameter from where I could choose the correct...

SEARCH/SECOND RESPOND i have seen via PanatermVer3.7 that eBay MFE2500P8NX was working with MHMD082P1C 750w.
So now should be programmed to work with MSMD022P1C.

there must be a way to...

need advice
I have a Panasonic Servomotor MHMD022P1C with a faulty Encoder MFE2500P8NX (disk 788B 2500-8).
I tried to replace it with the same one from e-bay. It...