Some cam programs have a (Rest) option that will only clean out the corner / smaller areas with smaller tooling. Not sure if that is usually on solid models though? It cleans out the remaining...
Type: Posts; User: MegaMoog
Some cam programs have a (Rest) option that will only clean out the corner / smaller areas with smaller tooling. Not sure if that is usually on solid models though? It cleans out the remaining...
Been workin on a special project for a client... of course more PWD related... LOL
She is split in two n partially hollowed out inside... 3 screws hold her together.
This should be a great...
SHARE away...
I just love makin stuff, especially auto related...
ThanX
I get the models from places like TurboSquid, Squir and the likes. Quality models make nicer looking cars...
Pretty much make em for PWD Racing. It all started back around 2009 when our son...
That did the trick!
ThanX
Looking for an instruction manual for the Speedaire Dryer model 5VC90. I picked one up on the bay but still need manual.
Thanks
How to take apart for replacement of internals? I don't want to...
Got some TOYZ for da nephews to use. Will grey out windows n paint lights n bumpers then add some wheels....
Finished up another car for customer...
Programmed with EZ-Cam n ran on my Haas TM-1 with vises & 5C "A" axis indexer.
...
G54, G55, G56 X0 Y0 Z0 is bottom center of car for programming. Once bottoms are done then the alum block is put in vise and the 1" center hole is for probing the center of car/block. Once G55 is...
Machine bottoms first with 2 holes for mounting to alum plate, 2 holes for pin locations. Then machine tops in vise with wood mounted to alum plate, then rear, front n sides on the A axis.
Alum...
Hi,
I have contacted vectric with an e-mail.
I contacted you through your e-mail also.
MM
Hi,
I will contact Vectric asap, I was at work all day. Thanks for your patience....
We should start a PM to finish this up.
Thanks
HI,
V-Carve 5.5 to 10.5 is $175 (V-carve pro - stand alone is $699)
V-carve 5.5 to Aspire is $1300 (Aspire - stand alone is $1,995)
I do believe there is a $50.00 transfer fee.
I will sell for...
I like mine on my HY-3040. I have added a second PP on my set up for all the inputs of homing, tool setting & probing.
Not the greatest video but hope it shows what can be done.
MM
...
I have used this info for my spindle with Mach3 (066), ESS(latest plug in) & Mach Standard Mill(Calypso Ventures), with an USB to serial RS485 chip set CH340(found on E-bay) on Windows 10. I kinda...
This might be worth a look... I use this for my spindle with Mach3.
It took me a while to understand it all, but I worked through it slowly n finally it worked!
Some guess work along the way...
...
I do not use this software any more. It looks as though it can be transferred to a new owner for $50 usd per Vectrics info.
I have (Full License) for VCarve Pro 5.5, I am the original purchaser.
...
I do not use this software any more. It looks as though it can be transferred to a new owner for $50 usd per Vectrics info.
I have (Full License) for VCarve Pro 5.5, I am the original purchaser.
...
Been working on doing some side work @ home with my Haas TM-1 in our garage. (Small Business)
I have been machining for over 40 years (Boy, time flies!)
I decided to kinda pick up where I left off...
Great post...
Read in its entirety... I kinda jumped around a bit in the time line of events but I think it will make sense in the end?
I'll add some info in hopes it will help someone with their...
https://youtu.be/NTViE_ajxq8
Had the day off so I got busy with some scrap matl...
Rounded the edges, milled a stepped slot... Keeps the phone off the bottom so sound will travel outwards...
Did...
YEP,
Just as I thought...
I do not have relay #23 on my I/O board. So I found a 8M relay board on the BAY. Took a chance that it was functional n bought it. It does not have the pins on the...
Hi,
I have a 2004 Haas TM-1 with software Ver M12.10N and am trying to get my Renishaw #40 Probe and TS27R functioning.
I replaced the batteries with new ones. It will turn on & off on the router...
This is GREAT INFO guy's, KEEP it coming!
This way I will have the proper foundation to get this up n running smoothly the FIRST time!!!
I knew I could count on The ZONE n all the peep's whom...
Hey thanks for the reply Jim,
I have an older breaker panel and am wondering if the (White wire) is the Ground/Neutral where the ground from the machine would go?
The one or (double tier) with all...
Hi,
I'm wanting to know if I can use Stranded #8 wire or is there solid wire for connecting power to my 2004 Haas TM-1?
Going about 30' from breaker box to machine in my residential garage. Going...
HI,
I am wanting to replace my steppers with some dc servos and came across this on the bay.
Has anybody used these and if so how do you like them?
I'm currently using a C11g with some geckos,...
Aspire is for creating/modeling/designing and producing G-Code and Mach4 is for running your control/machine with the G-Code that was made in Aspire.
I have been trying different settings in the lathe cycle for threading.
I'm not sure if this is a bug or some setting that just does not want to work.
If I change the Xc ( X Clearance ) from .010"...