Very nice.
Type: Posts; User: LouF
Very nice.
No problem all is well thanks, Gerry.
I corrected the problem all is well now.:)
Hi my XP Pc crashed I had a new HD installed Mach3 works good, but glitchy with the 2010 screen set I noticed a lot of the settings were not checked I have tried to get it to configure right it but...
I agree customer service is paramount.
Congrats that's great let us know when you recive your shipment.
Hi what CAD and CAM software are you using and what machine are you using?
Some very nice work they look great.
Here is where I purchased e chain for my machine you can get the same product cheaper on E Bay or Amazon https://www.igus.com/energychains
Just google E chain.
Gerry, Okay after doing the setup without the G code loaded and it homed saying in the window on the run screen "Material Offset now Calculated in Inches" I loaded the g code I clicked run it moved...
Gerry, so is there a workaround this what should I do? I am lost on a solution to this everything worked well before I had my Hardrive cloned.
The tool change position is set at.
Fixed plate X: + 16.963
Fixed plate Y: + 0.341
After zeroing without g code loaded it goes through the routine like normal it stops above material like it...
I do it with g code loaded I will try it without it loaded.
Okay, I set up my job center of the table I then click the auto-zero tool change Icon, my spindle moves down to the touch plate on the material. My spindle then moves to the second fixed plate...
It sends me home after I do the setup touch both plates the box pops up to start spindle. So I manually start the spindle through SupPid click the box and it sends me home instead of cutting the work...
Gerry, thanks.
Part of the G code file.
Thanks
Lou
Gerry, can I email the file to you @ the email from your website?
Lou
Gerry, I tried to upload the G code and I get this " Your file of 1.28 MB bytes exceeds the forum's limit of 500.0 KB for this filetype." not sure what to do.
Lou
Well, I tried my machine with the change made now after setup it goes through the routine lose and fixed touch plates I get the start spindle pop up. Now after clicking the message box to start it...
Gerry, It was not checked that must be it.
Thank You Gerry
Gerry, I am not sure I will have to go check and see.
Thanks, Lou
Rodger, they are in the folder I noticed two different Mach 3 folders on my "C" drive they both have M6 End and M6Start marcos One is labeled Mach3 and the other labeled "Mach3 new" It has been so...
I will check that out thanks..
I am having a problem with Mach 3 and 2010 screen set I have been using it for years trouble free. I recently had my hard drive re cloned if that could have anything to do with it otherwise...
I would lubrication.
I am also looking at the offerings from China.
CNC Router Parts I am looking at around 9K.
Happy to see you back I need a bigger CNC 4X8or larger any Ideas build one or purchase one?.