I think the Emergency Botton is pressed
Greetings Rene
Type: Posts; User: rot
I think the Emergency Botton is pressed
Greetings Rene
Hello,
the last days i have modified a ER 32 chuck to fit for my lathe. The collet chuck was was made by RC Machines for a Proxxon PD 400 lathe.
I only had to drill three holes and do a little...
Hello,
last week I´ve installed a 100mm 3 jaw chuck from Bison on my compact 6p cnc. I am much happier with the Bison. The 80 mm TOS chuck that i´ve installed 3 months before was not capable...
Hello Steve,
anything new?
Do qou probbably have any pictures of the working machine?
Greetings,
Rene
Hello,
in the last days i´ve managed to adept a manual thre jaw chuck to my CNC lathe. Its a TOS 80 mm chuck. Here are my photos. It was a big job for my small Lesto lathe.
Greetings Rene
Hello Arie,
nice design of a small Budget cnc Lathe.
Greetings Rene
Hello Pete,
anything new?
Greetings Rene
Hello,
for me, a Emco compact 6p owner its a very interesting thread. Clever made but i would be frightend ruining the chuck.
Greetings Rene
hello,
i dont think that you will burn the main drive. I think the mayor problem is the big possibility of crashing boring tools because of the big diameter. I checked this at my machine (compact...
hello,
which chuck do you use? It seems to be bigger than the standard one!
Greetings Rene
Hello Pete,
i have a Compct 6P wich is similar to the 120P. A very nice and sturdy machine. My machine was in a very good condition so i changed nothing. Wich chuck will you use? The pneumatic one...
hello bob^,
with roller bearings i have made the expirience that when i had made the clearence to small then the temperature rised very soon.
Greetings rene
Hello,
nice machine that you´ve build and a very nice spindle. Do do you have plans or sktches of the spindle?
Greetings Rene
Hello,
very nice machine that you are planning. Can you give ous more information to the spindle design? Which type of motor are you planning to use?
greetings Rene
Hello,
very impressive press that you´ve build. Very nice project. My own homemade Shop press is much smaller. Can you show some more pictures of the tools you are using?
Regards Rene
PS My...
Hello,
I like the style of your machine. Which kind of axiscovers are you planning?
Greetings,
Rene
Hello,
nice little lasercut machine.
greetings
rene
Hello,
awesome work, can´t wait to see her running.
Rene
Hello Steve,
wounderful machine. I can´t expect to see milling results. Incredible Gearbox.
Greetings Rene
Hello Lee,
nice design. I hope it will be strong enough. A CNC lathe will be one of my next projects after i finished the Zoltar
rene
Hello S_J_H,
its a nice little machine and in good condition. My own lathes are two Lorch, Schmidt and Co. of nearly the same age. They are both a little worn out but they cost nothing and came...
Hello Steve
Amazing straight concept and a superb machine.
Greetings from Germany, Rene
Best low budget cnc-projekt I have seen!
Everyday I´m looking if there is somthing new.
Hello everybody,
my name is Rene and i´m posting from germany. I´m still amazed whats going on here. i´m interested in CNC since i started building a metal miller about six years ago. Its working...