What model? I have the disk for a Partner 1g from 1994.
Type: Posts; User: converterk
What model? I have the disk for a Partner 1g from 1994.
Does anyone have a drawing of the spindle encoder mounting plate for rigid tapping on a Partner 1 part# MPI-84 or have one for sale?
Has anyone replaced the linear rails on a Partner 1? Where did you get the rails and trucks from and how much did they cost?
I have never used an open loop control. What is the difference in accuracy between an Acorn with Viper 250 servo drives compared to an Allinone dc control on a Bridgeport cnc knee mill?
Sporty Bob is an email or phone call away. He can tell you what you need to communicate with a Milltronics Centurion 5 controller. A computer shop cant do that.
Contact Sporty Bob and he can set you up with something that will work.
They are a great computer. You can get a Dell windows 7 install disk and it will automatically activate or buy an upgrade to windows 10. The nice part is you can buy repair parts cheap on ebay. I had...
Dell Precision M4800 Workstation | Intel Core i7 2.70GHz 4800MQ | 16GB RAM | 750GB HDD | Windows 8.1 This would be a good choice that can run any cad/cam program.
How much does the touch screen operator panel option for cnc11 cost?
Will a manual pulse generator work with the Acorn board? Will CNC11 software have a touch screen operator panel like the Acorn?
Message me your email address and I will send you a 3x and a 4x post.
SolidCAM Tutorial Video1 (Stock Material) - YouTube This video from 2011 shows how to set up stock. Hope this link works.
I wish I could have been at Westec, but I wasnt. There isnt much information available about the different programs from people who actually USE them. What are the advantages and disadvantages of...
Since you are a Mastercam instructor and working in the Hsmworks booth would you be willing to compare standalone Mastercam, Mastercam for Solidworks, and Hsmworks. What are their advantages and what...
Was the webinar recorded? I havent been on the internet in a while and of course I am a day late.
Mastercam X5 for SolidWorks will not work with SolidWorks 2012. You will have to wait for X6.
I have an Edgecam book and cd's for sale on Ebay. If the link dont work do a search for Edgecam on Ebay. eBay - New & used electronics, cars, apparel, collectibles, sporting goods & more at low...
How much do you want for the machine "as is" ?
I have the service manual open to the x axis page,the 2 ways are called saddle slides and are held in place by M12x30 shcs and are covered by 020 plug. When looking at the machine,you can see the...
I see that the ways on the VMC 760-16 are bolted on. Would I have any problem with alignment after removing and regrinding them? thanks, Terry
Has anyone used the Glacern reversed premium vise? They are reasonably priced, But I am concerned how well they would hold up in use.
What is the shaft size of the encoders on the black motors?
The last Hurco retrofit I did had the silver motors with a 1/2" shaft in back of the motor. I replaced the 200 or 250 line encoders with the Ajax 2000 line encoders. It was money well spent.
Are the servo motors silver or black?
Check your pm
Which system did you buy? Was it the cnc10 pci or the mpu11 with a cat5 cable? Ajax or Mach3 software?
Their new offer may be for the linux based software also, you would have to contact Scott next week. I just wanted to test the windows based software and am impressed with it.
I recently installed an mpu11 dc3iob control in a bedmill with 40x20x24 travels. I too was interested to see how well mach3 works and how the new cnc11 windows based control works. I had some...
What has changed between 2008 and 2010? We draw mostly simple 3d parts without assembly's and import them into cam. Is it worth the upgrade?
I am installing this control on a 40x20x24 bed mill. I will be able to run the Mach 3,Ajax linux and the Ajax windows software. I will post the results. Terry