Yup
Type: Posts; User: tklus
Yup
The washers I used have a flat load of 1272 lbs, here is what I used https://www.mcmaster.com/#9712k437/=17dnvyt
The lever is about 16" long and when I am not changing a tool, I flip the lever up...
Hey guys,
Figured I would share my quick change tool set up. It uses 6 Belleville washers like tormach and a lever to compress the springs and release the tool. I can share the cad files if anyone...
Hey guys,
I am surprised these controllers are not used more often. The prices seem reasonable and it looks like they work pretty good. I ordered one from eBay with a handy pulser or pendant,...
Mine gets warm but not too hot, although I haven't ran it too much other than the break in. I have probably ran it for 45 min total at full rpm.
I have heard of machines running hot for the first...
Great! thanks for the quick reply
What DRO kit did you install? I have a PM-25MV on the way and would like to order up the DRO set you have. I checked amazon and all I see is 6" 12" and 24". it looks like the X axis would need to be...
Guess I should have read the manual first. I now see that it can jog with the keyboard :) looks great! thanks for all the work you put into this.
Tim
Can you jog the machine with keyboard arrows when using this GUI?
I just found out that autodesk fusion 360 is free to use for hobby and start ups as well as students. So far it has exceeded my expectations and its free. :D
I am considering buying BobCad Cam. I currently use MasterCam at work and have access to Inventor for modeling. I just completed building a CNC router and have been using cambam but I am looking for...