Hello kwackers, thanks for this great controller, it is working great on the rotary table I built it for, but my brother has a table that has a 1500 turn to one rotation that he would like a...
Type: Posts; User: Sam Waters
Hello kwackers, thanks for this great controller, it is working great on the rotary table I built it for, but my brother has a table that has a 1500 turn to one rotation that he would like a...
Sorry for late rely..
I just wired it by hand point to point, never took picture of it.
It was something like this
Display is also from ebay.
HD44780 2004 20x4 White Characters LCD Display Module | eBay
I just made the board on my cnc mill, I just do it as a hobby sorry. You can see if someone else can make...
keyboard is from ebay, just put labels under caps.
1x White Keyboard 4x4 keys 16 keys Metal Panel, combined type keyboard | eBay
Got mine working.
Redrew the schematic and board in eagle if anyone wants to use it.
174733
174734
174735
174736
I'm using EMC2 on a mill, here are some screenshots of the settings.
Sorry I've havn't been around lately :(
Here are some more pics of my setup and a wiring diagram I put together.
The boards I drew up are designed to hook together at 90 deg angle to each...
For anyone who was looking at my previous posts.
This is the completed boards that I'm currently building, will have pix soon.
The older posts had some errors so please use this one.
...
Electronic Components Distributor | DigiKey Corp. | US Home Page
or you can try ebay search for 16F628A, it came up with 144 hits when I checked today.
These are all unprogramed IC's so you...
Just checked the Digikey site and they still sell the 4mhz version..
Digi-Key - PIC16F628-04I/P-ND (Manufacturer - PIC16F628-04I/P)
Took some time to figure out how to use Eagle-3D, but I like it.
Here are a couple of pix's of the boards I'm working on.
Anyone know where to find a 3d file for the 3 pin resonator
like the...
If they are 16F628-04 IP then NO they are only 4 mhz, you need at least 16 mhz parts.
If you are using V1 software make sure the enable pins are at 5 volts.
If you are using V2 software make...
Here are the new files with the modifications I mentioned.
I already am using them on my current setup so I just thought I would stick with them as they see to be working OK.
I'll attach a couple of pics of my current setup.
I'm not planning to use...
yes I really should... it's a work in progress..
On the X,Y,Z,W connectors on the BOB board pin 3 is DIR, and pin 4 is STEP
The enable is on pin 1 of the X,YZ,W connectors it can be...
I saved them as pdf files
I've been working on putting togeter a complete stepper driver for use with 1 to 4 modified linistepper boards(not pminmo compatible)..
The breakout board is fully buffered on all the outputs and...
Nice 3d view of the board.. What software did you use to create this picture?
Note: Ive been using the boards that I made using 3 amp motors ( with the tip-142 transistors) for 6 months now with...
Couldn't help myself, had to play with this one.
It is like playing an addictive game...
Oh well here's what turned out..
Yes I seen the cut trace and wired to the other pin... its already in the file I uploaded before..
l8r..
I finally got the boards made and populated and mostly assembled in a case..
lots of work to do yet..
I'm having problems programming the hex file into the pic16f628. I tried the original hex...
I compared the scematic to the one on the Linistepper site and they look the same, only the parts are in a differnt place, so should work the same as the orignial linistepper v2.
The motors...
The 100nf is a "decoupling capacitor" it helps protect the micro from lockup or glitches and should be placed as close to the vcc and grd pins of the micro as possible. With drawing more current I...
I am going to try and drive some 3 amp/ phase motors.
I made the traces larger so should take the current.
Added a 100nf cap on the pic and split the ground traces.
Changes I am going to try are...
I modified Patricio Oholeguy eagle files to reflect v2 of the linistepper and made some minor changes.
This is for homemade single sided board.
I have not made them yet so there may be...