Search:

Hi Gerry

Machine is set up with X and Y axis on the left side and Z and A axis on the right side
A is set as linear.

Motor tuning for each axis was checked and all 4 axis were identical.
...

Hi All, My machine ignores the Feed command on the y and a axis when they are locked using the formulas tab to enable me to do 2 axis cutting on my 4 axis setup. I had some kind help from learned...

Hi Ger, Thanks that is good news, but I will have to see if I can make lazycam do what I need before I can do it.

Hi Gerry
I am using an older version of mach, it does not give the option to slave 4 axis except under the heading formulas in configuration.

I am thinking of buying the new mach but I cannot...

I run a four axis cnc and have the following problem, when using formulas in Mach 3 to slave the Z an A axis it does not cut the same on both sides when the G3 command is encountered in the g-code....

Hello Bells
The best way I can think of is cutting your plane parts from 80mm pink or blue foam standing on it,s side, the second step is to, slice them in the right thickness using a stationary...

Hi All
I am new to CNC foam cutting, the Machine is up and running and now I want to start cutting R.C. aircraft taper fuselages, where do I go from here? I am a firm believer in KISS (keep it...