Thanks Jim, i used your settings last night and it does a very nice job just had to crank up the speed to around 157 ipm / 4000 mm/min to almost eliminate the dross.
Regards,
Geo317424
Type: Posts; User: MXDURO
Thanks Jim, i used your settings last night and it does a very nice job just had to crank up the speed to around 157 ipm / 4000 mm/min to almost eliminate the dross.
Regards,
Geo317424
So i managed to fix the problem last night turns out to be the z-axis velocity was way to high changed it from 2000mm/min to 1000 and now it pierce and cut at the exact heights without thc and with...
Hi guys i am VERY new at all of this cnc / g-code stuff.
I bought a locally made plasma table and it does a excellent job running sheetcam and mach3 but when i do a "dry" run ( thc and powermax 45...
Thank you for the info Jim, will test and compare.
Regards,
Geo
Thanks for the reply Jim, have done a few test and will keep with the standard 45 A consumables.
What settings do you recommend for 14 gauge / 2mm mild steel with the std consumables keeping the...
Will you only be able to use those finecut consumables up to 30 A ?
Sent from my SM-N920C using Tapatalk