Hi Davesnd,
the program i'm try to send to the CNC from the PC is small
%
O0008
....
....
M30
%
Type: Posts; User: k-linkz
Hi Davesnd,
the program i'm try to send to the CNC from the PC is small
%
O0008
....
....
M30
%
yes it used to work - model is 6mb fanuc okuma 4va
it was working before - when i came back it wasn't working - the guy said he just power it on and wasn't working anymore . there was a...
same issue :
change to 4800 311 -312 -313 444504
parameter :
punch code = 1
input unit = 1
device 1 = 0
device 2 = 0
still get does not transfer neither upload or download stay...
444488444490444492444494
444480444482444484444486
444472444474444476444478
couldn't fit all the photos444464444466444468444470
Hi everyone,
we have an issue transferring program on an Fanuc 6MB (issue both upload or download)
we put it on EDIT mode then press O-9999 READ nothing try P-9999 PUNCH
it stays on the...
Hi, i've try removing the RS232 cable doesn't show any error,
442636442638442640442642442644
- - - Updated - - -
442646
Hi guys,
we have an Fanuc 6M lathe.
it was transferring NC program before, but not i'm not able upload or download any programs.
I've change the wire and the punch card.
it does not get...
Hi Tom,
I've tested the drives with a battery, they moves the motors. so that is ok. So basically i should plug the output +/- 10V to drive even it says Analog it will give me DC. and then plugin...
Hi Tom,
I'm looking at the schematic of the kanalog i'm unsure where is the +/-10V DC
I see a +/- 10V but it says analog which correct me if i'm wrong but analog is AC not DC. or is it via the...
Thanks for the reply,
How am I suppose to control this all the breakout board I see use step/dir to control the drive .
Can you point me to a breakout board that does +-10v DC
Sent from my...
Hi guys,
we have an Kflop+kanalog
could it work to control and DCD01 drive
https://www.alterelettronica.it/en/products/dcd1/
I'm looking at the pdf it shows +10V and -10V to control...
Hi guys,
could you advice me if it's possible to add touch sensor for Z axis tools on a Fanuc M6-B
like something like this :
...
hi guys,
so i guess what am looking for is the join attachment for a spindle ?
is that how it's called ?
basically how do i attache the spindle to the robot arm ?
like do i get some duck...
Hi guys,
we have this old welding fanuc robot
FANUC Robot Arcmate Senior something like this
https://www.robotix.co.uk/products/fanuc/robot/arcmates/am_snr.htm
and i want to convert it to...
Hi guys,
quick question, i'm unable to load the a programm (that was working) to the cnc via RS232 to the CNC.
could it be the Punch card that is having the issue ? I've check the wired even...
Hi guys,
we have a Fanuc 6M-B, we cannot load the program into memory via RS232 PC to CNC. Was able to do it before, but one day it just stop.
Changed cable and PC nothing - i'm able to load...
Nevermind guys, fix the issue.
issue was a limit switch on the Z axis that was loose. so it was doing it zeros but the connection was bad.
was able to do the transfer all good.
thanks.
Hi guys,
need help, need to send the a programm to the fanuc 6m.
it setup as parallel port. to the motherboard.
the program is 01313.NC
power light is ON
Not sure if it would work, but wouldn't be easier to load your tools specs in a library in the CAD/CAM software and once they are loaded all you have to do is set the zero offset and run the program...
maybe if you add a DNC server like this. but that pretty much what i found.
From my understanding , you load the G-code and than you do an work offset on axes XYZ . from the machine origin to the...
self note #2
https://www.youtube.com/watch?v=B1g78kAyqbM
so i found this maybe it will provide some help on how to setup tooling on fanuc 6m
https://www.youtube.com/watch?v=U99asuDT97I
Hi guys,
i've got this fanuc 6m-b okuma and i bought a dnc server to plug it instead of the computer cable
can someone tell me how to i setup the tools and calibrate them.
i've got like 8...
Hi General :) ,
yes i've try with the ready "on" it's only when i took the picture, i was in a hurry. But yes i've started the machine - zeor all the axis.
formulas are:
memory - >...
so didn't find any interlock that would prevent the transfer to the machine. single block was disable on the operator machine interface.393796393800393798
humm.. interesting didn't think that. so that tape module on the side of the machine could have an interlock. didn't touch it at all but maybe with while opening the side door (highly doubt it) but...
and also change the punchers card.
so RAM card and puncher card .
all the rest stayed the same and it was working before.