I asked for larger stepper motors in the kit mentioned below, and yes, they do have bigger:
Yes, we have the bigger motor Nema 34 stepper motor with 1600 oz.in, Nema 42 stepper motor with 1800...
Type: Posts; User: KTM
I asked for larger stepper motors in the kit mentioned below, and yes, they do have bigger:
Yes, we have the bigger motor Nema 34 stepper motor with 1600 oz.in, Nema 42 stepper motor with 1800...
Well, I might have 2 steppers in a parallel connection, running a screw each for both legs of the gantry, or I can have the table running forth and back, under the fixed gantry. And the workshop does...
That's all correct, except A axis, I don't need that because B&C axis is sufficient freedom for my needs. Also, considering I will be running this project so complex now I am planning to extend the X...
and even better, this:
5 Axis Nema 34 stepper motor 878 oz.in CNC Router/Kit | eBay
it is a bigger torque motor kit, 6.2 Nm, meaning there is a bigger gantry that can be moved by these small...
I have found this:
5 AXIS CNC Router or Mill Stepper Motor complete kit | eBay
it is a 5 motor controller for a 5 axis router, looks like all that remains is to understand the principles and...
I am not sure about the costs, but I hope I will have an idea by the end of the week :)
Longer tool means vibrations if it is eccentric. Bad vibrations :)
Dismantle of the model in several...
5 axis definitely... I wonder how are the german machines milling a near vertical wall, the ones in the first example you gave me... I'll send them an enquiry...
And there is necessary to have the milling head able to swing along the X axix because the milling motor does not interfere with the milling surface if we have to mill a vertical wall for example XZ...
I see, the machine looks simple enough, but I imagine that for carving a shape similat to a bath tube for example, it needs to have a very long milling head, or an additional screw that can lower the...
OK Nokturn, thanks for the advice, I have posted a new thread I hope I will have some advices as well.
Best,
Adrian
Hi,
I want to build a larger CNC for foam milling or other low density material ( wax, milling compound). The precision required is not so strict, 0.5 mm should be fine.
Dimensions are 1500 mm...
Hi,
I want to build a foam milling machine about 1000x2000x1000 mm and I would like to know if there are somewhere the plans for such thing, available for download.
I am from Galati - Romania....