Search:

Hey gang I have a VFE 0 that has an Overvoltage Alarm 119, It popped when I set the g54. I Turned my back and it just popped like a firecracker. I found a bad X motor had it repaired and replaced the...

Try https://www.facebook.com/servotechusa/

My post no longer outputs the correct size. I posted a 2 inch circle with a .375 endmill and it cut 1.875 circle. I programed to the inside so no comps should be required. But it was still too small....

Hey Gang,

I have an Integrex E500 with a Matrix control on it. The Laser was crashed a while ago. I just got the New Laser installed, aligned and calibrated.
My problem is when I run the Tool...

Did you get your machines running? I may be able to help. Do you have manuals on the VSX85?
[email protected]

Thanks,
Itt

After looking at the photo, It looks like the connector is not on good.
Turn it around so the 2 written in sharpie is toward the operator side.
It won't hurt anything if that's not it. Just put...

Monday I downloaded the R2V plugin for Gibbscam and it is awesome!
A buddy hit me up about a logo on a Harley Derby cover and I spent about 3
weeks cleaning up an imported dxf that I used a...

First I would check to make sure the wire had not been inadvertently left off of the clock card.
The federate pot goes thru the keyboard interface then straight to the clock card via the 3 pin cable...

You can replace the -5 CPU and the Computer Interface and increase your baud rates. I know at 9600 it is really slow for DNC.

Go to

FADAL 1400 Boards by one of the Originators of FADAL VMCs
...

Before I spent a lot of money on a retrofit, I would look into just upgrading the control.
If you went to a Dash 5 CPU and a later version than 1990 operating software you could
Speed things...

1. Did Wesco Reman the machine?
2. What kind of warranty comes with it?
3. Does it come with a labor warranty?
4. Do you pay labor for service tech during warranty? Same as question 3. but big...

I don't think it's a hardware issue since you can run it in MDI. If it was I don't think it would run in MDI. If zeroing the memory doesn't solve it I will be surprised. But if not there are 2 LEDs...

Sounds like your brain got scrambled.

I would ZERO the memory. To do this first you need to copy all the parameters and backlash settings.
At the ENTER NEXT COMMAND Promt type SETP
there will...

Oh yeah that was with new turcite on x and y bearing surfaces

I just talked to him he said it was $9500.00 plus he bought a ball screw from fadal another 3600. It was Oklahoma City not Tulsa

Paul

Don't mean to hijack this thread, but does anyone have any idea how to make NCFadal work with vista or win 7?

Thanks, Paul

Are you talking about X or Y ways? If you're talking about Y, mic you ways at both ends and in the middle. If you have more than .0015 or .0020 inch on Y way it will be hard to repair without sending...

Thanks so much, that explains why the same serial adapter works on my Bike dyno.
The dyno software ahe a gazillion com ports to chose from. All my CNC com software only allows comm 1 thru 4.
...

I have a Fadal mill (standard cnc88 fadal control) and a Hyundai lathe with a Siemans 840c. control) My desktop died so I bought a new laptop for cadcam and transmitting NC files to the machines.
...

Hi Gang,
Just thought I'd introduce myself.
My real job is repairing CNC's but I've picked up a Fadal Tool Room Mill and A Hyundai Hit 15 along the way.
I have them at home and like to do custom...