Search:

I believe I have solved this issue. The machine is currently working correctly after replacing the carousel drive motor and brake. I will report back if the alarm returns.

Do you happen to know which one of the two ribbon cables feeds rack 0?

I don't see any fuses in this control cabinet.

Could a coil in a motor contactor cause this error?

I have a problem with a 1996 Tree ZPS VMC 500 with the PC2100 control which is basically the same as the Acramatic 2100.



Last week I started getting an alarm 40-33. I do not have a wiring...

Here is a photo of the drives they rear 00 -- and 00 which if I recall correctly is pretty normal.

I didn't see any alarms on the drives, I will double check when I return to the shop. I believe they were 0 -- 0 on the three drives..

I have a 1996 Daewoo Puma 8S with the Fanuc 0T-C control On the machine control panel (not the Fanuc control) alarm I am getting a code 16 and 17. I have tried googling a solution.

I know it's...

I know it’s a long shot but do you still have this for sale?

Did you ever get this resolved? I'm having the same issues alone with alarms 408, 409, 414, and 424 on a 1995 Daewoo Puma 8S with Fanuc OT-C.

I know this is a very old thread but I'm having the same problem and need help figuring out a solution..

Ya, I think I am really close, just need the darn plasma cutter to show up. Keep getting told a shipping date then delays...

Things I would do different.. I would mount the linear rails on the...

I finished up the torch mount tonight, everything is running and ready. Well at least as far as I can go until my Powermax 85 shows up from Hypertherm.
...

Well I just placed my order for a Hypermax Powermax 85 with machine torch. Can't wait for it to arrive.

Its running. Not dialed in completely yet, and I still have alot of work to do. However, seeing it move under its own power yesterday was great.

I have a little more wiring to get done, a few...

The bed is made of Alum. sheet it is broke on the two long edges and I am going to weld in the ends plates shortly. It has a bunch of build up from sitting in the shop so long, mostly dust from...

I am currently working on a 50 x 98" plasma table. I picked the table up from a guy locally, he was in the middle of building it when some stuff came up. When I got ahold of it the frame was built,...

Jim,

Thank you for the reply. I got cut short with the posting above. Here is some more info..

Material - Mostly mild steel, but intend to use for some Alum and Stainless.

Thickness -...

I am seriously looking for a new plasma cutter. Want to upgrade once from my Cutmaster51 to.... I want as much machine as I can run on single phase. I have 3 phase in the shop but limited to two...

Thats interesting, I have been shopping for a new system, been lurking and reading. Infact this is my first post I believe but this might sway my pick of a machine.