Call Eagle Plasma this guy helped me get mine going.
Eagle Plasma LLC
Type: Posts; User: seanmurphy265
Call Eagle Plasma this guy helped me get mine going.
Eagle Plasma LLC
Well a Torchmate 2x2 would be in the same ball park.
I would also suggest getting a total on all the parts before you build. You may not be far off from buying a table that's ready to run. I would also make sure I had every single part before I...
He has a 60c which has blow back start. How about posting the links to your plasma table along with the instruction manual. That will help you in getting more help. Post some pics of your table,...
I using this one with my PP60C. I have not had time to finish yet. I need to check the full arc voltage wiring between the plasma cutter and THC. There are several videos on youtube with thc and...
I'm not sure about the cons, but the pros would be mounting the racks. I tried to drill and tap holes in my gear racks; it was an absolute pain in the you know where!
Check out Welding Tips and Tricks - TIG, MIG, Stick and a pantload of other info Jody has a video showing tig welding with a welding lathe. That my give you some ideas to start with.
You may want to think about they type of plasma cutter you are purchasing. The one you are looking at has a high frequency start. A plasma cutter with blowback start will work better with all your...
I need to remove the pinion gear from my Z-Axis, but I can't get it off! Where can I get a pinion gear puller?
Also has anyone drilled and tapped gear rack with success. I wanted to use set...
300 oz will be plenty big for plasma cutting. I thought bigger OZ motors would make the machine run faster, but it's more about holding power. The setup you are going to run is aluminum so I would...
There are several good kits out there, and they are reasonably affordable. NoSleep Studio has a plasmabot 5.0 kit that is nice diy kit. I have the plasmabot 4.0 kit myself. There are several build...
I've been building my own since late February early March, and I am nearing the end. Right now I am learning all the software sheet cam, mach3, and I am ready to make my first cuts. I could not...
Reposting this on the Everlast thread, originally posted in Johns 4x4 Plasmabot thread.
This may help, this is from Ray at Everlast.
I will try to answer what I can. Not knowing what...
I am getting ready to order a THC from CandCNC. I'm probably going to order the Everlast 60C plasma cutter, but I'm making sure I can get it to work properly before I order it. I have several...
This may help, this is from Ray at Everlast.
I will try to answer what I can. Not knowing what controller you have I can’t tell you exactly how to hook it up.
Pins 1 and 2 are the torch...
Did you ever get a THC, and how did you wire it with your Everlast Plasma cutter?
I think his point is the over $$$ amount! Hypertherm is the way to go on a CNC machine. Hypertherm has probably spent more time developing the CNC function than all the other plasma manufacturers. ...
This guy is using the same plasma cutter with THC.
Pierce Works, LLC I'm sure he can help.
I would call Everlast, I think Ray is the one who is overseeing the CNC Plasma stuff
877-755-9353 X207. I'm not sure if your machine came with a manual in the box, but the real manual you have to...
I'm building a plasma bot 4.0 version 2 with the 4 Axis Probotics Monster kit, RBX 3 channel relay board, and upgraded power supply. I went ahead and paid the extrs $150.00 to have the kit pre-wired...