You can buy balanced ER20 nuts from Sorotec. The work fine on the machine
Sent fra min SM-A520F via Tapatalk
Type: Posts; User: ronsand
You can buy balanced ER20 nuts from Sorotec. The work fine on the machine
Sent fra min SM-A520F via Tapatalk
Thanks. I am not using the beta, but the latest stable UCCNC version. I have sent both VistaCNC and CNCDrive an email. I can also post at UCCNC forum :)
No problem Dan. Thanks for putting the plugin together [emoji3]
Sent fra min SM-A520F via Tapatalk
I have upgraded my OmioCNC 6040 router with the UC300ETH-5LPT/HDBB2 combo and everything seems runs smoothly.
But there is an issue with a new VistaCNC P4-SE pendant i got for the upgrade...
For anyone interested, here are the working Nowforever D100 VFD (same parameters as E100 FW 1.3) settings for modbus (modbusez plugin UCCNC)...
For anyone interested, here are the working Nowforever D100 VFD (same parameters as E100 FW 1.3) settings for modbus (modbusez plugin UCCNC)
parameter - default -> new
p000 - 1 -> 2...
I new I was on the right rack regarding the Sact field, and found the answer in one of the other UCCNC threads (HY VFD); the UCCNC Sact field had to be set to 2451 for the dro to display the value....
I see that in the last few versions of the plugin you can't set the Sact label. Is this then hard-coded in the plugin? In UCCNC, the default label number for Sact is 870. If not set to 870, what is...
I have now converted my OmioCNC 6040 to UCCNC with UC300ETH and HDBB2. Everything is connected and working fine (steppers, home/limit switches, touch probe etc.
I have also connected the 2.2kv...
forgot the link :) http://www.cnczone.com/forums/uccnc-control-software/331002-new-modbusez-setup-plugin-uccnc.html
There is a modbus plugin written for the ones that has changed to UCCNC. I will try this out when I do the change in the near future. I have the UCCNC sw and hardware waiting for me when i get home...
Super. Thanks for speedy response Dan :) I have the new UCCNC stuff waiting for me when I get home from work in about a week, and will keep you updated :)
Hello Dan. I have read through this thread, and thanks for putting the modbus plugin together :)
I am reconfiguring a Chinece OmioCNC 6040 machine with UCCNC sw and UC300-5LPT and HDBB2 bob. The...
godt initiativ. ikke umulig at denne kommer godt med :)
Have a look at post #310 and the following. It is also mentioned earlier I this thread.
Sent fra min H60-L04 via Tapatalk
for more on the bearings; check my post #310 and the following http://www.cnczone.com/forums/chinese-machines/275124-cnc-cad-software-forum-26.html#post1815958
it is ment to be like that on these machines, but it is more common to have two bearings on the stepper motor side (preferably angular contact bearings) and one on the opposite side.
Really good work there minim, and welcome olaby :)
So then we can expect something regarding fusion 360 in the future? :)
The cam part of Fusion 360 is really good for regular 2.5D work and specially good for more complex D3 work.
I have been using Vectric Vcarve Pro for many years but over the last year or so I have been more and more drawn to Fusion 360 cad/cam. Is there functional post prosessor for the "2010 Screen set"...
Here are a couple of renderings of a dust-shoe I have designed for the 2.2kW spindle on the X6-2200L. It is to be 3d printed in ABS. The first pictures show the dust-shoe with a "central nozzle"...
A shot of the machine after leveling/tramming, and fitting of the angular contact bearings. The steppers has also been installed here.
...
It is the best solution with what we had to work with :-)
Sent fra min H60-L04 via Tapatalk
That will not be a problem wit the oldham style coupler on the steppers
Sent fra min H60-L04 via Tapatalk
I also fittes wavy washers behind the nut on the stepper side on the x and t axis. This is to keep some axial tension on the ballscrews and still allow for variations due to temperature changes.
...
Over the last few days I have had the X6-2200L almost completely apart for leveling / tramming. At the same time I have lubricated the rail-blocks and the ball-screws nuts (the last where completely...
Omiocnc are selling genuine mach3 licences for use with their machines. In addition you get the Omiocnc config files, specific for your machine.
Sent fra min H60-L04 via Tapatalk
I have ordeted the 7900 type 10x22x6mm angular contact bearings for installing on the opposite end of the steppers on the x and y axis, and at the stepper side on the z axis.
Even if it is not...