It looks like your Default CRC selection got changed.
Goto File:
Click on Preferences, click on Machining Prefs, then Default Mill CRC. I would select Tool Center.
Type: Posts; User: roamer
It looks like your Default CRC selection got changed.
Goto File:
Click on Preferences, click on Machining Prefs, then Default Mill CRC. I would select Tool Center.
Well mine is working good. I'm at 115200 and no duplications.
I did have a larger file come back, but it turned out to be my control added missing zeros.
Turned an M6 into an M06, X.255 to X0.255...
Thanks, I'll do that.
II have Predator, so file compare will be easy to do.
I just got the Moxa connected and talking.
I'm going to make up some shorter cables, get things mounted properly then...
Did you ever get this figured out?
I'm just about to try out a Moxa 5100 series.
One thing about the Preferences video, its older version. CS Preferences have been moved to the File tab, System menu.
I'm happy to report that worked.
Thanks again.
Here's another good one.
https://youtu.be/tCAnR1pPeX4
There is a Create CS from Face.
I'm not in front of my cam pc right now, I'll look and get back to you.
I Never move the model.
Open CS Tile, create a new CS, then use the CS Pallet to set the new...
Thanks, I'll give that a spin in the morning
I have a 2005 VF-2 that I added probing to.
I have the spindle probe working great for X and Y, and Bore measuring.
Today I finally had a chance to finish up the wiring for the OTS.
I got the OTS...
Did you get them?
I believe you need to adjust the grid offset if you disconnected the servo from the turret shaft.
Sent from my DROID RAZR using Tapatalk 2
Try Hart Tool and Engineering.
Sent from my DROID RAZR using Tapatalk 2
Do you have the manual? There is a setting that makes 9000 numbered programs visible. You need to turn that on.
I was shocked when I opened the first box and found ALL sides and faces were machined, as well as the counter bores. It's a good deal for a shop like mine that doesn't really have the time for making...
facegarden,
you can buy jaw carriers from Chick that allow you to bolt the standard Kurt jaw to it.
I have two QL-6's and use that set up.
I found a supplier on ebay for soft jaws that sells them...
No, it's not simply a path move.
A straight line would require both motors to move in an arc.
Look at a scara robot and you will see what I mean.
Do you have a Serial port on the PC you want to connect to?
If you do, then all you need is a 'Null Modem' cable available at Radio Shack.
If you are Solder savy, you can build your own. There is a...
I'm in the design stage of an applicator arm. It will be a two axis system similar to a robot arm. I am currently looking for a controller and software that can control it. The arm has to reach into...
Start shopping here, http://www.madeinusa.org/
Everything made in the good Ol US od A.
I only buy American, unless I can find it made here.