Search:

Does anyone know of a U.S. based supplier of JBS type guide bushings? I remember at the last IMTS show there was another company that was making those guide bushings and customs but were U.S. based...

Thanks guys i think those are what I need.

Now that I have my computer working right with their other Sharp machine, sending and recieving fine. I now have tried to send their program for the...

I am working on a sharp 2412 with a fanuc omb control that for some reason has completely been cleared out. So I need to get a copy of all the 9000 and 8000 series programs for this control if...

I use Titex drills every day and do not spot any unless under 1/16

How stupid am i. Just passing through and didnt even look to see how old post was.

your program should be

O7777;
(1234); program to be qued up
M30; or M2;

What it looks like is the geometry is showing up as a b-spline. If you will hit ctrl-l for labels you will see a b and a number around the geometry denoting it as a b-spline. What you can do is...

We have a 2000 Fadal3016 and we end all programs with G0G90E0X0Y0Z0

We have a NH40000 that we had the spindle replaced about a year ago. The service guy that pulled the spindle found a wad of shavings in the cooler line to the spindle that had clogged it up and not...

I use Solidworks '08 and GibbsCam '07 every day together.:cheers:

We had the same problem with our NH4000 and let it go till we ended up having to replace linear guides, pneumatic cylinder, linear rail, and all proximity switches. What the problem is is the...

Here is my problem. I have a program that is over 8000 lines long and I need to move it to another machine but in the process I need to rotate 90° about the Z-axis therefore making whta used to be x...

I started like most probably as a button pusher but was so intriged that I started reading about it in books and online in '94 right out of high school. I have done it long hand and now use Gibbs...

When I do a helix I just use the G3 I-.5J0Z-.02 and it works on my Fadal 4020 with Fanuc 18I controller.

I think the 13th icon at the top left of the gibbs screen will toggle the toolholder display.

Thanks I finally got it.

http://kurtworkholding.com/downloads/cadfiles.php


Here you go if you have any luck let me know cause when i open the X_T link all I get is a bunch of jibberish.

Yes I did but the d-series thay only have in dxf-2d, .prt which my solidworks wont read and .x_t which solidworks doesnt recognize. I thought someone may have drawn this up already and could e-mail...

Does anyone have the kurt d-series vise in a solid that I can get to work in gibbs cam. I need the solid for a simulation. Please help?????

try http://www.cgstool.com/2000-SERIES.html