Dan, I know this won't help you much, but I've been using your latest plugin along with the latest version of UCCNC for the last few days, I have the sact field and amps field both enabled and...
Type: Posts; User: mphel
Dan, I know this won't help you much, but I've been using your latest plugin along with the latest version of UCCNC for the last few days, I have the sact field and amps field both enabled and...
I have purchased 3 motion controllers from them along with the software licences. The service has always been very good, polite and efficient.
I do understand that the possibility of lost emails...
Yes, same here, been down most of today I think..
Sent from my MotoG3 using Tapatalk
I think ports 1,4 and 5 have most of the pins set as inputs. 2 and 3 should work ok.
Sent from my MotoG3 using Tapatalk
Gerry, I have one of these plugged into my desktop in the house just for testing inputs, switches etc with a uc100.
Never driven a motor from it, but it works fine for what I need.
5 Axis CNC...
I did previously have my Huanyang VFD working via modbus with mach 3.
This is the one I used...
Mach3 plugin for Huanyang VFD | Le royaume d'éole
So I presume it could be done with UCcnc...
The video has less than 1500 views, one of those will be mine and I completely disagree with most of what is said... The complaint that people could pay for the software and find it doesn't work with...
I've tried recreating parts of the jog screen sidebar too, as I'd like to do away with it.
Just need a few buttons and the jog speed field, once you've removed a few things you don't need from the...
I've used Fusion a little and found the "cncrouterparts.cps" post worked fine for what I did.
It is a modified Mach processor..
Definitely something I'd be interested in.
The ability to make small changes on the fly to fine tune things like a bearing fit, without having to go back into cad, would be very useful.
I'd love...
These can be really useful, nice to be able to stay within the software to build up a program as you go.
Seems to work fine on mine too..Thanks Robert.
Latest update.. 1.2014 now available.
I think it would be good to have some representation from the company, be it here or on a dedicated forum.
As long as we all 'play nice' and keep things constructive, I think it would benefit...
I can say that I've had better luck using MPG's.
I have one running on an existing machine, with a UC-100 and older analogue drivers...seems to run very smoothly...as does one setup on the bench for...
I would imagine it's an origin offset in vcarve.. If you could include a screenshot of your material setup dialogue in vcarve that would be helpful..
I find things exactly as Gerry says, there seem to be some viewpoints you can't quite get, no matter how you rotate the toolpath.
It would also be nice to look at an 'end on' view with the 'z' up 'x...
I think you have to hit 'enter' to make any changes stick with the latest version..
My guess would be... one side of the NC circuit to pin 15, and the other side to ground. (but only a guess :-)
I think it's generally accepted to use 'Normally Closed' wherever possible to...
Thanks for these Andy, I've just bought a copy of the software and recently e-mailed Balazs regarding more hotkeys to run macros such as homing, probing, start cycle etc. He said there will be 48 in...
A very quick and long overdue update just to prove the machine worked..
A few examples of work the machine produced
I've since built a MechMate to machine 8' x 4' sheets
I was able to re-use...
Both spec sheets http://www.motioncontrolproducts.co.uk/pdf/FL57STH76-2808B.pdf
and http://www.motioncontrolproducts.co.uk/pdf/FL60STH86.pdf give specs for unipolar and bipolar. Wiring...
I'm sure the larger motor will be better but you may not get the full advantage without increasing the size of power supply, as far as i understand the motors can be wired unipolar if they have more...
David,
I used these- FL57STH76-2808B - about 260 oz/in on my machine http://www.cnczone.com/forums/showthread.php?t=35019 I now have drivers and power supply from motion control products as well,...
As far as I understand, if they are wired in parallel then you get the combined amperage and 12v, if they are wired in series you get the combined voltage (24) and amperage of one supply. This setup...
I came across this thread while researching my machine and allready had a couple of PSUs lying around so gave it a try.
http://www.cnczone.com/forums/showthread.php?t=17548
I've since opted...
I bought something like this, http://cgi.ebay.co.uk/SOLID-STATE-RELAY-SSR-3-32-VDC-240V-AC-45AMPS-CONTACTS_W0QQitemZ320139414236QQihZ011QQcategoryZ36328QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
It...
Very nicely engineered machine, I'm sure the dust extraction shoe will do the trick.
One question, what model router are you using and how do you like it? It looks like one that I've been thinking...
As I understand it, you only need two switches per axis, if using Mach software it will treat the limit as a home when you tell it to "reference all" if you set it to reference in a negative...
My build is based on ideas from Joes 2006 machine, he has a very detailed log here:- http://www.cnczone.com/forums/showthread.php?t=15139 which will tell you everything you need to know about...