Hi Chintan,
I would use a sub like this:
%
L100
G1G91Z-1F500
G90X-150
G91Z-1
G90X30
Type: Posts; User: jbexplorer
Hi Chintan,
I would use a sub like this:
%
L100
G1G91Z-1F500
G90X-150
G91Z-1
G90X30
Your right, just had a brain fart....
(nuts)
I always hit the tool with a hammer , works good for me...
JB
:cheers:
N25 G17 G3 Y-.7475 I2.3227 J-.7475 F61.8794
G17 is for "Y" "Z" interpolation.
You need to use G18...
JB
:cheers:
It's probably dirty. You could put in a new one.
JB
The cable wiring is different for a fanuc, hope this helps.
JB
Good for you. I don't know of any back plotters that show the fadal subroutines. It would be nice to have one. I can see why you need one, program at home then take to work, and something does not...
You should be able to plot it on the screen. What year and machine do you have?
JB
Check out the manual on macros. You can use something like this
%
O111( ENGRAVE 6 PARTS.. 3 UP 3 DOWN
L100
XR1.YR2.
L9201R1+0.R2+.25R3+R9.R0+.01F10.(FIRST LINE
XR3.YR4....
You want to use mirror image G51.1 not rotate.
%
O1 ( MIRROR ENGRAVE
M6T1( ENGRAVE TOOL
M3S6000
E1X-1.Y-1.( MOVE TO START OF ENGRAVING
G51.1X0( MIRROR 'X' AXIS
H1Z.15M8
G1Z.1F15.
At enter next command type PA
The program will show. Now use the "D" key to move the cursor down to the line you want to change and type the new z = Z-.375 enter.
It's really that simple.
JB
At enter next command, type IN enter.
then type O1 enter for the program number.
Then type the program.
It's really that easy.
JB
I just through the manuals out this year.
Hope this helps.
I've had the program just disappear while running the part. Machine stops and nothing in memory. Now I RI after every job, after saving the programs. Haven't had a problem yet.
JB
I don't see an H offset and the Z is at .5 but the R0 is at 1.1 The Z needs to be the same or higher then the R0 Change it to this.
N30G90G54G0X0.25Y-0.361S1000M03M8
N40G1.Z0.5F11....
You can use a sub program.
%
O1( TEST
L100
N131 L9201 R0+0.05 R1+2. R2+.0125 R3+0 R4+1. Z-0.015 F30. (TEST 1101
G0Z.1
M17
M30
(MAIN PROGRAM
add z change after x y and M45
N19 X44.1723 Y32.0931 Z-20.8 M45 (only here I want changed depth on Z-20.8)
N20 X16.8723 Y51.9277 Z-2.09 M45
After the repair man left, I mounted a indicator to the spindle. Then moved x y with the hand control to the 4 corners to take the readings. Then I moved the table to the center and sweep a 14" dia. ...
The machine is level. That is the first thing the repair man did. We just don't have the money to fix it right right now. Just need to get by for a couple months.
I work on a 1999 Fadal 30 x 16 hs 88 CNC. I've run this machine since new. The other day I did the table push pull test with an indicator and got .004 - .005 movement in Y axis. I called the repair...