No. I was referring to the placement of the G50. The machine requires three things before it will do anything:
G14
G140
G50 S####
My Fanuc controlled Lathes and Screw Machines are a little more...
Type: Posts; User: ZandS
No. I was referring to the placement of the G50. The machine requires three things before it will do anything:
G14
G140
G50 S####
My Fanuc controlled Lathes and Screw Machines are a little more...
Sorry, I meant pull off a part and use turret A to finish the part on the sub spindle while roughing with B on the main spindle.
So if I understand correctly: when I use the sub-spindle to pick off a part I won't then be able to use both turrets in CSS. That could require too much thinking while programming. Making sure to...
This is interesting; I had not looked at this. According to the manual:
To activate constant speed cutting mode on turret B, specify G111 with G96. To restore such mode on turret A again, specify...
This was the problem. The machine does like certain things in certain places. To add to fordav11's solution: the machine also seems to require a G50 S#### before any actual operations otherwise it...
Well, that got the program to display correctly, but now it just alarms every time I hit go. The alarm is 743-2 ALM B Work Coordinate Mode Command Nothing. I thought this was related to the G140...
Problem Solved! The program sample I displayed was M14 in the machine. The other two programs had G13/G14 either missing or in the wrong location.
Yes the program select works. Each program is labeled with a unique program number so I could verify this. So, after front loading, the program display shows:
O1111
M2
Or
O2222
M2
Etc...
So...
G13 / G14 is what it is on the machine, I made a typo. Even when I leave that off it should default to G13, but I still get the same problem: 0nly Program# and last line display. Hitting cycle start...
Hi All,
I'm new to Okuma machines (Only programmed Fannuc and Fadal) and I have some questions on what I am doing wrong. I've managed to load programs into the machine and I can edit them just...