Sadly I am not sure this is an option. The door lock mechanism has a LOT going on in it. It has a safety switch in it. It checks for both an open position. Closed position. Lock engaged position....
Type: Posts; User: JordanMach
Sadly I am not sure this is an option. The door lock mechanism has a LOT going on in it. It has a safety switch in it. It checks for both an open position. Closed position. Lock engaged position....
Hey coop31!
Sadly. There is not way around this. It is written into the code of the machine. Trust me, I have tried and tried and dug to the depths of he11 for an answer, and there isnt one.
Hi Coop31. I have made small progress on the Processor. I have made a few small changes here and there which have helped tremendously, but still dont have it exactly where I want it to be. I havent...
Okay. So I have been working with VSC to try and understand what is going on inside the post processor. I am starting to understand it. However I am still having trouble how to execute what I want....
Thank you. I am in the process of getting Visual Quick Code Set up and also gonna read through the F360 Post Processor manual. I did find the pre-load tools line. I also found program name as...
That change did work great! And it changed every comment through the program and not just the start. So a few steps further. When I first received this machine 5 years ago, I remember there being A...
Its hard where to start lol I guess maybe can we start with the Start of the program? Start at the top and Ill work my way down. Ill work with the default Fusion 360 processor as everyone can get...
Not sure If I am allowed to do this or not? Below is a link to my post in the Autodesk Post Processors forum of this site. This way if there ever is an answer, I will post it there. And then if...
So I am going to attach a few different files here. All of these posts are machining the same part. A 5"x7"x2" with 3 1" holes in it. I mill the outside with a 1/2" Mill. I helix the center hole with...
Hello All!
I am looking for a Siemens Acrmatic 2100 post processor for Fusion 360. The generic A2100 post processor requires too many edits to make it of much use. I have an old post processor from...
I know there is a separate forum specifically for post processors. But I figured it couldnt hurt to ask here if anyone has a post processor they use in Fusion 360. If I am not allowed to post this...
I have had similar issue. However that harmonic "hum" noise you speak of was much much louder on mine. That "hum" is called dither. That is the drive constantly jittering back and forth to hold...
ikjake - This does help some. When I take the PC apart to clean, reseat connections and replace the battery; I will also write down the specs of the Processor and Ram that is in it to keep on my...
I am really afraid the RT board is whats bad. After today the machine will be finished from running a production job for the last 9 months. Once we are done I am going to disasemble the computer in...
Have you tried contacting FIVES yet? They are the ones who have all the info on these machines and can probably help you get up and going. IF you dont have theyre contact let me know and I will find...
I cannot help you as I dont have your machine. However. In your other post I responded with someone who should be able to help you. Good luck.
Below is copied and pasted from another post by Greg Wood. I have dealt with him in the past and are the current support for these machines.
Fives Cincinnati Technical Support is 1-859-534-4750...
Just checking in to see if you found the issue for this or not? I dont have the same drives, I have the Siemens drives in mine, but I do have the A2100 though. I randomly receive an alarm on all axis...
I do know the batteries dont last forever. I also know to NOT remove the batteries without the boards being powered. However, can low or dead batteries cause the issues that I am seeing? Or is this a...
Okay. So I read a lot of these posts in this forum to learn from everyone else and the issue that they have. However, with all that info, these machine are still quite complex and confusing. My...
I do hear that air blast that you speak of in the tool changer. However when I talk with FIVES they say that is to clear the gear that rotates the tool magazine and is not for the tools themselves....
mechardt55, are you asking me which model I have? Or the jarl85?
If you are asking me. I have an Arrow 2 1250C. I too thought it should be standard to have a spindle air blast as every other...
My machine had air blast active already. My machine already had the solenoid in the back and was in fact working. There was a plug in the air hose however stopping you from hearing the air blast....
Are you talking about air blast when a tool is changed? If so, the machine blasts air on its own if the machine is equipped with such feature. My machine has half the hardware for it, I am looking to...
Can you post some pictures of it and some details on it? Like Manufacturer, model, etc.. If I am able to piece it together I will, I just dont know where to start or what to look for. I browse...
You can get the BIOS setting from FIVES machine for free. They are the company who owns Cincinnati Machine. If you have the recources to change the BIOS yourself on the WS board, then I would contact...
So I have done this research in the past when I received my machine some odd years ago. However since then, I have forgotten what I am looking for. My machine is 4th axis ready, meaning it is...
Update!
I purchased 2 LED's, 2 driver's and a tube of thermal grease on evilbay for a total of $35 shipped to my door. I bought 2 sets of each so I could fix both lights and I have the parts in...
I honestly dont know. That light is only IP65 rated. Mine is a IP66 rated. Now if HAAS did switch to IP65 rating, then I'd be comfortable to switch as well. However if they are still using IP66, then...
Hey all. I normally am on this forum in the Cincinnati section. However my 2015 VF2 has an LED Worklight that went out today. Didint realize how much light those put out until now, I feel like Im...