Kress 1050 FME – 1,
Milling router spindle motor. Made with very close tolerances in Germany. 1.5 Hp., 220 volt , 4 bearings, spindle lock.
Variable speed, does not require an VFD and all...
Type: Posts; User: Robert Fon
Kress 1050 FME – 1,
Milling router spindle motor. Made with very close tolerances in Germany. 1.5 Hp., 220 volt , 4 bearings, spindle lock.
Variable speed, does not require an VFD and all...
Thanks for the message. I will try that tomorrow, Ill Bet that what I'm missing
I'm talking about the spindle start button on the mach3 screen !!
Have a cnc router with mach3 and a ess smoothstepper interface, windows 7.
I just finished changing it over to a 2,2k spindle and a Huanyang VFD, It has a USB rs485 connection
between the...
There are no messages displayed in Mach3. Here is a sample section of G-code that it stops at in one program. the line it stops on is 474 in this case.
N4660G1X10.0711Y2.4574Z-0.3196...
Problem is not lic file, mach3 will run to the end of 24000 lines of code if the
smoothstepper is not used, in other words using the parallel port.
Have tried various other gcode files and still...
Just got a new USB Smoothstepper and am trying to set it up on a spare
system. the system is Intel core2, windows 7, and Mach3 ver 3.043.040,
v17f & 2.08.24 SS drivers. I have the SS just...
Mach 3 is probably the most used for these machines, Kelly Cam is also useable. You will need an older computer with a 25 pin parallel port.
486 or later will work fine. most new one dont have...
Built a 24"x28" CnC router a year ago, using a xylotex drive and motor package. Shes well built, no wood construction, Runs on 20 mm precision
bars and precision ball bushings
Motors are 425...