Search:

Yeah a big snap ring on some and a nut on others.

Dynapath has always helped me with problems, I had to get a whole new set of boards for my mill when I got it and they walked me right thru everything changing chip sending my pic tables to the chips...

Thanks! And yes made it fit the taper lock bushing that's on the old sheave, I still need to call dynapath so I can change my display to 6000rpm

I just had to tap the same amount of holes 2 days ago but with a 3\8 tap PM me and I can write the program for you and send it to you in a file ready to send.

I had it made at a machine shop on a cnc lathe then had my buddy balance it on his crank balancer, I can get you the shops number if you want it, they still have the drawings.

Okay so for the last few days ive really been tuning in my J325 in and getting all the little bugs worked out, and one thing that was really bugging me was the way each axis moves when you reference...

I'm sure everyone else has had trouble with finding a good post processor for the tree J325 using bobcad cam V24 like I have as far as just downloading it and it working flawlessly programming...

Okay so I've got my new sheave made and balanced to make my spindle turn 6000rpm, does anyone know what else has to be done to make the screen read 6000rpm? Any help would be greatly appreciated,...

Hold down the start button for a few seconds then it will beep and ask what line you want to start at.

Well I looked and I have a 1500/8000rpm motor and a 2.800'' drive sheave and a 6.400'' driven sheave so if my math is right I need a 4.800'' drive sheave and that should get me to 6000rpm!!

Bob at ZPS told me that there is a jumper wire that would have to be changed. I don't know for sure.

I have a J 325 with a 3500rpm spindle and I'm wanting to upgrade it to the 6000rpm setup but the pullies are no longer available! So does anyone know what the outside diameters of the pullies are for...

Thanks to Paul at Dynapath I got it working!! I had to change the eprom to an eeprom and reload parameters. unlimited lines of code now!!! lol

[QUOTE=cnctoolman;1137251]I have a J325 1990yr model. Delta 20 contol.

I can reference all the axis. Afterwards the X and Z move in the correct direction according to the control. The Y axis on...

To check what to set your reversal comp. at you will need a dial indicator that will read tenths of a thousandth...set it up on what ever axis you want to check against your vise or something,set...

It has a dynapath delta 20 control on it.

No one??? anything??

I have been trying to drip feed my J 325 with no luck!! I have went into catalog mode, and typed in RS232C,then I hit mode select, then 1 for auto mode, then cycle start and when I hit cycle start it...

thanks jagardner I will give it a try today.

I was running my tree j 325 the other day with a .125 endmill and was almost done with a 600 line program when the end mill broke when it was on line 530
so I put a new end mill in and set my z zero...

Hello guy's I am in need of some help does anyone know if DMM ac servos and drives will work with a dynapath delta 20 control?
the reason I am asking is that I would like to retrofit them to my tree...

It looks like they changed the part# cc22529
if anyone has one of these to sale let me know.

Hey guy's I'm in need of a baldor servo for a tree journeyman 325
tree part# CC22525
baldor spec # FMD0205B-00 or 54P144Z025
please pm me if anyone has one that is forsale.

Well after working on it all day I finaly found the problem the 3 little tiny wires going up to the proc switch on the z axis had broken and fell down into the main frame and was shorting together so...

Hey guy's I have ended up with this tree mill that buba 447 was working on,I did get it up and going after buying a whole new rack of boards and 2 servo drive boards, the mill was working fine I have...

Hello every one does anyone have any servo dynamics sd1525-10 amps
that they want to sell for a reasonable price?
Thanks

I have a tree journeyman 325 that has servo dynamics sd1525-10 15 amp drive boards in it , I had my x axis board to go out the other day I was needing to know if a sd1015-10 drive board will work to...

looks good to me just make sure it comes with the driver cd
any null modem will work just make sure you get it with the right ends for your application.

yes my setup is still working fine.

if you make the cable in the diagram it is the null modem
so all you will have to get is the usb to db25 adapter
a null modem is a cable with pins 2 and 3...

one more thing to check I wonder if someone changed the pinout on the inside of your PT plus so they could use a printer cable? you might try a printer cable I'm pretty sure the only differance is 2...