Hello.
do you solved the problem?
i have same issue also, Cybelec DNC880S can't go to Windows.
Tried to re-install the Windows but always fail, maybe because Windows version is different
Type: Posts; User: komang
Hello.
do you solved the problem?
i have same issue also, Cybelec DNC880S can't go to Windows.
Tried to re-install the Windows but always fail, maybe because Windows version is different
Hello again..
Today I checked the machine and tried move the axis using diagnose mode. For Y axis and X axis working good, only R axis alarm AX1152 Axis R1 forward LS sometimes backward LS depends...
Hello..
My Adira Press Brake PMO 13530 with adcontroll 10.
The machine can't indexing/home position. This is used machine and new for us.
any advice or manual book will be very appriciated.
...
hi.
i think initialization process not completed, maybe there error on any axis.
you can check using maintenance mode
regards.
Same issue on my vipros 255
Hi..
Previously I have same problem.
I changed the hydraulic valve with new one.
You can test with jumper cables 200 and 214 (I'm not sure with cables number, please check on the wiring diagram)
Hi..
I need help with Komatsu press brake PHS 35x125. The machine off around 6 months during Covid19 virus and previously it's working good.
This week I plan start production and the machine won't...
Dear Hemikiller,
Thank you for your help..
I have problem the machine after run 4-7 bend the monitor suddenly off. I tried to turn off and on the machine and start run, after 4-7 bend the monitor...
Hello..
I need manual book (operation manual, wiring diagram, hydraulic diagram etc) Amada RG50 with DC-9 II controller.. See photo below
Your help very appreciated....
Hi everyone..
Happy new year, wish you happy, wealthy and prosperous new year 2019.
My machine Amada shearing NS-2535 manufactured date 1994 has alarm "Er-02" as below photo. What caused this...
Dear Amadajoe,
Thank you for your feedback..
Last time I check accumulator pressure +- 60 bar, bigger than standard on the manual (around 30 bar )
And how to setting RV, PRV, and URV valve?...
Hi Hemikiller..
Thank you for your help..
My Machine Amada shearing H-3013 the hydraulic oil temperature is very hot/high (we can't touch the cylinder and the pipe because it's very hot).. i'm...
Dear Hemikiller,
Thank you for your reply..
Production date November1996, see below photo..
https://www.cnczone.com/forums/attachment.php?attachmentid=406270&stc=1
regards..
Hi everyone..
I need manual book and hydraulic diagram Amada shearing H-3013.
Please share..
Your help very appreciated..
Regards..
Dear Friends,
I'm Komang from Indonesia.
I have Amada Press Brake HFBO125, already upgraded with Mainboard 486 Aton Compact Flash and Amada Software V4.32. Currently the machine is OK/normal...