I have a problem getting the pendant to work. It seems to be conflicting with my 485USB that controls my spindle. I can see the port that the USB485 for the spindle is but the iMach3 pendant doesn't...
Type: Posts; User: golijoe
I have a problem getting the pendant to work. It seems to be conflicting with my 485USB that controls my spindle. I can see the port that the USB485 for the spindle is but the iMach3 pendant doesn't...
I have a problem getting the pendant to work. It seems to be conflicting with my 485USB that controls my spindle. I can see the port that the USB485 for the spindle is but the iMach3 pendant doesn't...
I have 2 drivers for 2 identical motors that will be turning the same direction on my X axis. Can they be connected to the same port on the breakout board since everything will be the same?
493656
I can see the port that the USB 485 for the spindle is but the iMach3 pendant doesn't show a port number. I've looked in the device manager and there is no port that is showing up for the iMach3...
I have a problem with the IMach3 pendant. I've tried plugging it in several USB ports but it still seems to conflict with the USB 485 for my VFD. When the pendant is plugged in and I start Mach3 I...
Any help would be greatly appreciated.
I have a motor that is:
220V
300Hz
18000rpm
4KW
2 poll
Air cooled
The VFD is a HY04D023B
I have a few questions on the parameters below:
PD001 1
Can you show the connections to the stepper?
Thanks
I’ve been a CNC programmer for about 27 years and now I do just a few threading programs for our shop in Houston due to the manufacturing plant here in Yorktown closing in 2015. We had various...
I have a Stainsmart ST-V3 Breakout board trying to connect to a KL-4030 stepper driver. Has anyone ever connected these two before? See attachment for one way that was suggested to me. I just want to...
I have a Stainsmart Breakout board trying to connect to a KL-4030 stepper driver. Has anyone ever connected these two before? See attachment for one way that was suggested to me. I just want to make...
Thanks, that helped and it looks like we found the problem.
:wave:
We do a lot of broaching on this machine so the spindle is not rotating but when I talked to the operator and he said that if he rotates the chuck to a certain position the alarm will go away. Would...
The alarm is OT116 and the description of it is
OT 116 Disconnection Pulse Coder Bad Pulse Coder. Broken Cable.
How can you tell if it’s X or Z
:confused: