How old is the machine? older machine probably not have it at all.
Type: Posts; User: CNCRim
How old is the machine? older machine probably not have it at all.
Seem like work piece is hold down good enough and the speed is too slow plus no cooling to flush out the chip, it getting right back into the cutting edge.
Can't see what the job is like to can't...
Switch back and forth with the absolute and increment mode, in this case is unnecessary. I like to kept program in absolute so at the begin of the problem, the safe line is G20G17G90G80G40 to...
post your code here?
Cimco Editor I think is much better unless money is the subject.
I hate to bring it to you so far everyone talking about machine and so on but my experience is the material you cut "WOOD", nature of wood tend to contract and expand due to temperature. Running in...
It had been almost 20years, I think you need G98 or G96 after thread cycle.
GeoffW1,
I can't get Mach3 to do cutter comp, I made a separate post on here for help and many answer tried to help but the problem still persist. Any ideas?
Never use Fadal before, but Use to run Haas and there is support a option is the setting you should turn on while machine run. Any B axis move beyond the setting will get alarm.
you answer my curiosity about XP and Win7 with PP.
Oh well take a look at my at my 2019 Surfcam, doesn't have that interrupt feature. :mad:
Thanks Just what looking for.
I have many projects that need tabs and if these feature build in will be very helpful, right now I have create another layer geometry to do that. So do SurfCAM have these feature somewhere in the...
Thanks you it work like I want it.
I don't think anything out there that will be free. First, Check to see if the Mach 3 Wizard on it work you might contact them see if they still offer full version. From what you said I think you...
P tell machine where is tool radius point. Click here for picture and better picture click Here
So depend on how your machine setup relative you the part, that is how you put in the P.
How old is the machine? The chance older machine eye/proximity sensor switch broke need to be replace.
Boy, 2.5 Megabytes is a lot however if you want to 3D machine and it is not enough. Why dont you call tech support from Connecticut they should able to help you which parameter need to turn on.
MACH3/ MACH4 is by far the most popular for hobbies use. Did you buy this from Ebay with those chinese supplier? The machine is great and the price is awesome, however when come to technical support...
Fanuc and Sinumerik have too different set of G-code from what I remembered, I had away from cnc 15 years, check you manual.
Look at RCS60 give you example, it pretty much write one program for a family part and assign movement axis with variables you want.
Not what you want to do, anyway when you see can cycle i assume the person is manual program it. If you use CAM software to post is different story.
It is sound to me it is setting issues, baudrates and take a look at tolerance interpolation. Try baudrates at the highest setting see if it make a difference.
Before try to change anything i...
G99 to G98 and feedrate too slow maybe
G98 F8.0
https://www.hillaryinc.com/index_htm_files/GE_FANUC_User_Manual.pdf
check the screw hold the ball screw/ ball thread sometime it loose.
nice to know...
I have the same problem but with Mach 3 and I trying to use cutter comp to bring it to size but that is where the machine act funny.
Thanks everyone for the help. However, it didn't solve weird move. I have software that can be easily offset it just annoying, kept play with it I will figure it out.
aware of that but so far it doesn't make diffirence.
- - - Updated - - -
Yes, it is program like that by design.