the problem is solved.
3 parameters are set on on the rong place. and parameter 84 for the zpoint ref needed another value.
thanks for al the suggestions.
greetings albert
Type: Posts; User: nijhuis
the problem is solved.
3 parameters are set on on the rong place. and parameter 84 for the zpoint ref needed another value.
thanks for al the suggestions.
greetings albert
oke, so the don't have a function? do you something about the error 451 t servo?
> Motherboard: A16b-1000-0030/06c
>
> Machine data:
> Fanuc tape center model d
> 6m
> Series m63
> Typ A04B 0034 A003
> Ser 530432
> 290418
290420
monday we get a mechanic from fanuc, so lets hope he can solve it.
when i do so, i only see macro up to 551.
i found them under the button ''set" when i press it twice.
or does my machine don,t have more?
i have found somebody with the same machine,
where can we find the macro for tool change?
para 120 and 122 are used for tool change i found out, but i could be wrong.
can somebody help me with solving the problem for this error, and wich parameters are used for this?
the error is :...
yes, that is way to do it,
it works for every paramter but not for 0120 and 0122 :mad:
it is giving alarm: 451 t servo.
it requires the parameters for tool change, anybody an idee?
hello dpuch, i have the manual and also read it. the problem remains, still need to change the parameters.
i already opend a new post/tread, if somebody has the same machine, so i can view the...
hello,
does someone has the same machine and working? or know sombody with the same?
i need some parameters, which mine is missing for the tool change.
...
see the attachment for parameter list
the manual says, check parameter and increase the value .
which parameter is it?
this is what i found in the manual. alarm 451 t servo283708283710
hello fordav and dpuch,
i have erased the memory, so all the parameters are zero. and i have set only the rs232 settings in de parameters, and then i have upload the parameters by pc.
everthing...
hello dpuch,
yes I did it manualy.
I don,t have a backup on the pc. I have tried to change by pcload, the communication works, I can change everything while adjusting parameter on pc and send...
Hello,
I have fanuc tape center model d with fanuc 6m control.
the bubble memory has crashed and I replaced it with a new one.
and I have put in all the parameters bud I can't change parameter...