Hello - I am seeking a machine tool end user / specialist or technician who has experience setting up Renishaw probing on a Fanuc control. I have a 3-axis VMC with a Oi-MF Plus control with two HSS...
Type: Posts; User: northerncalguy
Hello - I am seeking a machine tool end user / specialist or technician who has experience setting up Renishaw probing on a Fanuc control. I have a 3-axis VMC with a Oi-MF Plus control with two HSS...
New to CNCZ, but been following the thread. Do you know if the Pulsar column uses linear rail slides like the Torus Pro? Not really visible from the shots/images.
I did as you prescribed and saw something interesting on the scope. Sure enough, the PWM output is working however there is what looks like a ground loop problem. The large 60hz wave is revealing :)....
It's alive!! Sort of...I'm puzzled by two things:
1) Why is the new crystal not working? It's a standard one made by ECS. I've another I can swap out though.
2) Even with the internal...
Looks like those settings got me one step closer; now I see some text on the display, but garbled. This is after each detent on the encoder wheel...the button push apparently has no effect.
...
Yes, power is working correctly - I have a bench supply feeding at about 10V within the spec of the regulator. That shows a correct output of 4.99v to the rest of the circuit. The LED backlight for...
Yes, it does -- I finished the grounding, programmed the PIC and powered it all up but it's not alive :(. Obviously...something went wrong during the execution and I am trying to trace it through. Do...
Tweakie - I've managed to get most of the board populated and during soldering, I quickly realized that the board layout you provided + the Gcode was designed for the isolation milling method you...
Awesome, my latest batch of Mouser components includes a 20Mhz crystal. I have actually fab'd your PCB already so just waiting to get the drill bits to do the holes then it's on to soldering.
If...
Hi Tweakie - I am trying to make the controller and was hoping you could share the ASM source code and any construction tips? I attempted to get this working with a protoboard, but no luck so far. Do...