Put program in to test and spindle goes ccw I must have parameter set wrong. Also try to send or receive program but get bad characters on pc screen. Are there parameters for rs232 setting?
Thanks
Type: Posts; User: macperfo
Put program in to test and spindle goes ccw I must have parameter set wrong. Also try to send or receive program but get bad characters on pc screen. Are there parameters for rs232 setting?
Thanks
I had some numbers wrong in the parameter section, it will zero return now. The only thing now is the mode switch when it goes from mdi to handle it says mdi on screen on both settings is that...
They sent me original parameters and also procedure to reset home but it didn't work. Do you have to hold down cancel and p together and where is P? I will check 8400 peremeters
Thankyouu
Thanks fir all your help! I got the keep and relay settings and put them in. Almost there now it has zer return back but twwo mdi settings instead of one. Now it shake very bad when I home in y axis...
Thank you for all your help! Company is YCI supermax rebel 1 machine. I called them for parameter put them all in. I checked the parameters in 900 and when I checked 0901 it was wrong. I tried to...
What do you mean by machine timer and relay? Thank you
Thanks for your help! I checked the DGN 720 to 727 on 720 I had a 00100000 but after check my 8100 on I found some wrong changed them and reset it no more code! Now I can't zero return the machine...
Battery Backup went dead on machine while sitting. Had all kinds of errors of course when I replaced battery. Got parameters put back in but still have one error code 414 x axis. Does anyone know...
email is fine
Yeah mine is micro switch that is the only way it works. I turn the machine on it says required and machine homs to the setting in machine that I set for the program. You have to do it that way. I...
This anilam control only has one home setting that is set each time you set the machine under machine home under settings. It will zero return to that home when you hit servo reset and home return or...
Yeah they do match I think it has something to do with the port being inactive when bobcad accesses it. I can send fine thru terminal program. Also my com port is thru a usb port and maybe bobcad...
Just got laptop and has vista. found a usb to db9 converter works great. The problem I have is every time I try to send the file to my fanuc it gives me the dr signal off. If I use a terminal program...