Admin, Sorry for posting.
Type: Posts; User: selrahc
Admin, Sorry for posting.
ive thought of it that way - measured the slats, they are inconsistent.
Jim, what CNC brand is being used to cut this extremely high quality part? :D
Hello,
Do T100M and T100 has different duty cycle capacities or they are the same?
I have seen certain recent models of Hypertherm Plasma cutters do allow continuous arc pilot, where even if the arc does not sense the presence of metal plate, the pilot arc does not shut by itself....
FYI, Pin 1,2,3,4,5,6,7,8,9,14,16 & 17 are output signals, Pin 10,11,12,13 & 15 are input signals, and Pin 18-25 are ground connections.
Pin 2,3,4,5,6,7,8,9 are output signals with slightly higher...
Well i would like to certainly thank the Geckodrives Motor Control for taking the trouble to inspect my broken drives. Recieved with thanks!
In the invoice I was provided with inspection results,...
Hello Spartan,
Its been awhile ive played Artcam, but what I can tip you of is:
You can try using a Fanuc Post Processor because Fanuc and Mach3 happens to use the same G-Code language. Try...
Hello everyone,
I would like to try a 6 axis setup, 2x Nema34 1800 Oz/In Stepper Motors, and 4x Nema34 1200 oz/in stepper motors, all from keling, as well as 6 Geckodrives.
There is not really...
Gerry, so where do you place your monitor? In an CNC enclosure or open air?
As the title says, what screen size resolution are you using for Mach3 operation? Im interested what monitor display size you all are using! Eg. 800x600px, 1024x768px, 1366 x 768px, 1280x800px, or...
It's possible to modify the M03 Macro for adding a pierce counter. When the pierce counter reaches a specific value, say 30, M03 Macro will trigger a new script that has your variable timed pause....
nice one, epineh XD
Henrik, I did try your method earlier before posting. For some what reason, it still doesnt work. Like you said, in between 1 and 2.7k, my original resistor was 2.4K. Still, it ended up at 23.98. But...
Thank you Tom! Well both of you, I did try removing the 1.5KE6.8, it came out with 23.98VDC.
I suppose i will put it back, and replace it with a 2K2 resistor!
I was wondering, if this 24VDC 2A...
Henrik,
I'm not quite sure. I saw on some PCB board who is doing the same thing. @@ Well, I'm gonna remove it soon.
Hello guys, I hope i'm in the right place to post this help about triggering PC817 with 24VDC, 2AMPs, for an input pin in parallel port for Mach 3.
Back 4 years ago, i started using and have been...
Thanks for the info, but sadly Google didn't turn up much relevant info regarding Tosnuc VMC-45. I suppose you can peek around the stepper driver to see if there are any labels. Also, try to provide...
I wondered if you have tried to adjust the G203V's adjust trimport... Look through the manual and read the trimport thingy.
As far as I've experienced, start by making sure the trimport is at the...
Hi Rustyf7,
Here's my overview that might help you out:
EMC or Mach3 "hijacks" the PC's Printer Port and turn it into a Connection that is capable of controlling the CNC. I suppose it's a CNC...
Hello guys!
I have been using this method for over 6 years, and i think it's very effective.
Using AutoCAD 2006's Line Tool, click on a point where you want it to be pierced, and type 0.00001.
...
Oh yeah, also how does the stepper servo mode actually works? does it work like a brushless DC/AC servo? if in servo mode, means i can increase up to 20amp?
Tero,
I've bought 3 VSD-E drives for over 2 months, but I dare not make any movement. I'm more into trying to understand the 20x to 30x times rated voltage.
My 1810 oz/in stepper motor has a...
But there are no holes on the PCB board! how to screw them?
Hello everyone! I'm :drowning:
I wonder how should I mount a PCB board when there are no holes to mount? The board is a double sided PCB, means there are routes on bottom and top of the PCB...
Hmm, is there a PDF document which describes your Galil Plasma's CNC control unit? Can you send it over through a link?
Sunmixed
Hi Todd, In addition to Mike(TOTALLYRC's post, an external signal generator such as DSPMC will lower your CPU's handling, putting your CPU in a much more relaxed, mode, as well as reduced CPU...
Hi Dan,
How did you managed to fix it?
Sunmixed
I think it's a bit of dangerous to use wireless for DNC. The environment around can affect the wireless signals, and it may disrupt the Is and Os in air. That is what I'm worried most.
Does DNC...
Hello Todd,
I would suggest you to use Windows XP for your Mach3. Be sure to get the latest Windows Updates! But in order to reduce the PIII Processor's calculation, I would suggest you to get an...