Nothing Cuts Like a Deer https://readytocut.com/threads/deer-family.3764/
free download - DXF + SVG - Ultra Ready To Cut - .05" kerf clearance for CNC plasma cutter
works for all CNC cutting...
Type: Posts; User: SignTorch
Nothing Cuts Like a Deer https://readytocut.com/threads/deer-family.3764/
free download - DXF + SVG - Ultra Ready To Cut - .05" kerf clearance for CNC plasma cutter
works for all CNC cutting...
Two Roses readytocut.com/threads/two-roses.3722/
free dl - DXF + SVG - Ultra Ready To Cut - .05" kerf clearance for CNC plasma cutter
501182
they're ordinary servos so you can run them with an ordinary servo drive
https://readytocut.com/community/forums/plasmacam-retrofit.190/
upping the volts should help - and separate power supply for those two motors
readytocut.com - just register to download
349944
President of The United States of America
349942
yep - constant velocity - you either have to turn CV off - or decrease feedrate, and/or increase acceleration, and/or set CV distance to a tolerable radius (which will cause the machine to slow down...
the deer and trees are some of my designs, at signtorch.com - (c) -
Deer Family 6 = : SignTorch, Turning images into vector cut paths.
Tree 354 = : SignTorch, Turning images into vector cut paths....
off the shelf gcode is unlikely to be ideal for your machine/material/settings - use sheetcam to generate gcode that does work - that means create a sheetcam tool with the right lead-in, pierce...
a lot of PC boards have an LPT1 port - it's a 26 pin dual row pin header on the motherboard - you just have to locate the pins - get a parallel port bracket - and possibly enter BIOS setup to...
the tension bracket pivots on two screws - make sure those screws are both there and not too tight - where the arrows are in the photo -
unlike DC - AC has a power factor to consider
nice - what is that wooden thing in the background?
coppercam exports gcode and mach3 reads gcode - coppercam is for circuit boards so it wouldn't have much text design functionality - you need vector graphics software (inkscape, corel draw, etc..) to...
Do you have constant velocity on with a high federate and low acceleration ? Try turning CV off and see if the problem goes away.
call plasmacam - does the axis move up and down with the buttons - does the software show the Z axis control features enabled - my z axis cable connectors have to really be pressed together hard...
wall plates are often made of hard nylon or polycarbonate - that can gum up your bit real quick - so use a lubricant (or air), conservative feed rate and lower rpm - be ready to hit stop if anything...
photoresist - toner transfer - rub on - iron on - been there - done that - nothing but trouble
routing is the way to go if you have the machine for it - not sure what you mean by peeling the...
.
for reference, that is a SignTorch Free Sample Image - Buck Mule Deer : SignTorch, Turning images into vector cut paths.
it is useful for all types of cutting - it just happens to be plasma/laser...
in order to make the centerline version, since there are intersections, I used the mouse to draw the centerline curves (in corel draw) just like hand writing, then I just offset that outward to make...
dxf for both annular and centerline style
you can download the vectors including dxf from where that image came from
Indian Motorcycle Logo | ReadyToCut - Vector Art for CNC - Free DXF Files
that's what backlash does -
did you check the encoder per step 3 in the instructions (before connecting the motor)
it sounds like the encoder isn't working - could be defective or lost power or bad wiring or bad connector to...
yes - to be clear - I wouldn't even attempt to find or hook up a 3rd party stepper motor - an un-exact match probably won't work right and might even damage the control box
you're mighty welcome
I'd think a stepper motor is unlikely to actually be weak in one direction - both directions are identical in every way except for the order in which each coil is energized...
the motor is a hollow shaft with internal nut - probably not made in usa - probably not easy to find exact match - an approximate match may not be compatible - upgrading (the software) won't change...
the 5V doesn't flow through the bearings - the bearings (or alligator clip) are always grounded - the tool setter is an open contact which floats at 5V by way of a weak pullup resistor - when the...
You have to start a new project then hit FILE / IMPORT / IMPORT-BITMAP
Then it will list raster formats
If you hit FILE / OPEN then it only lists vector formats