Search:

2 unused spindles from my CNC project 1 is a 220v 1.5kw 65mm ER11 spindle the other is a 110v 1.5kw 80mm ER16 spindle. They were left unused because I decided to go with a different spindle size,...

I have a quick question, are the Huanyang VFDs interchangeable between 110v and 220v via PD settings? When I got my 110v VFD new and after reseting them the PD values were are all 220, wondering if I...

The 110v spindle still faults out on 12amps so looks like I'm ditching it and going 220v. Not sure if I'll use the step up which you linked which was some handy info or steal power from the dryer. Am...

I just bought this VFD 3KW 110V VARIABLE FREQUENCY DRIVE INVERTER VFD 4HP 13A HUANYANG CNC | eBay and it maxes out on PD 142 at 12 and the seller is telling me that I do not need to change pd 142 "...

The ebay seller appears to be ignoring my repeated messages asking why it can't set past 7 amps, looks like I'm in the market for a new VFD. Any recommendations for a proper one that will run the 13...

I've tried resetting my VFD at least 5 times and no luck getting PD142 to go over 7. After resetting PD03 04 05 were all locked at 50 but if I set them backwards as someone instructed I was able to...

Double checked and PD000=0 and PD142 is capped at 7.0, also tried PD014=20 and it still faults. I think I may not have a proper VFD, here are the markings on the side of it.
...

Here are the markings on it just to confirm http://i.imgur.com/6wg0V0O.jpg

Thanks for all the details, I tried changing PD142 past 7 but it appears to be capped there and was unable to raise it....

Thanks for the tip, I read through the thread and followed the suggested settings by mactec54 and still no luck. I have tried many suggested configurations and none seem to work, I have reset VFD...

This thread has been very helpful. I have a bit of an outlier for a spindle that is not even referenced as existing in the Huanyang manual. I have a 1.5kw spindle but it is 110v not 220, I've only...