Yes I'm looking software for MR-J2-CT. However I have MR-J2S Configurator but that doesn't work with MR-J2-CT.
Type: Posts; User: Alamgeer
Yes I'm looking software for MR-J2-CT. However I have MR-J2S Configurator but that doesn't work with MR-J2-CT.
Sorry for late response and didn't get notification until I see it manually. I'm still looking for that software if you can ask with your friend that would be awesome. By the way Standard MR-J2...
Would any one share MR-J2-CT setup software or a link to download? Not able to find on Mitsubishi site.
Your help greatly appreciated.
Have you succeed to have parameter for Fanuc 15 ? I'm also on same boat, has lost everything.
Would any one share if you have one Fanuc I-Series AC Spindle drive manual B65025E or any advice where I can get it.
If you are interested to fix your defective A06B-6114-H210 with a very reasonable price let me know at [email protected]
Are you still looking solution for Fanuc alarm? if yes let me know where you are located? I'll give you few option to get fix this issue. PM me for fast response.
thanks
Sorry for late response.
I was referring the power supply that mounted on Fanuc 0M control, the part number would be something like that A16B-1212-****, not A06B-6087 which is servo/spindle power...
Sounds like the WGoyer advice is ignored. It would be a power supply (on Fanuc 0 Control) issue or power supply fuse pop.
Hi guys,
Would any one share Fanuc 16-MB, 16-TB or 16-*B SRAM and FROM data, which uses Fanuc 6-axis 16B controller (A16B-3200-0110) B type interface. Your help greatly appreciated.
Thank You in...
al-04 means The input power supply is abnormal (open phase).
I just found 6079 and 6096 have a same base module board, it just have different interface, have a look on attached pdf page. There should be something to communicate 6079 with Fanuc 21i control.
Thank drdos
Hi drdos,
I just found A13B-0154-B001 optical link would be the option to connect 6079 with 21i-MA. But do not know more about it. One of forum member used A13B-0154-B001 in Fanuc 16C but don't...
Hi gbownel,
I know it's quite old thread, but I have one small relevant question and believe you would have enough knowledge to response it. What's the purpose of A13B-0154-B001 optical link. Can...
Hope this helps
Thanks for response, but I'm looking something else. I want to use same 6079 control card with additional add-on to connect 6079 via HSSB.
Hi guys, Is there a way to link Fanuc A06B-6079-HXXX with Fanuc 21i-MA controller? As 21i has a HSSB link but 6079 doesn't. I heard there is a card in market that can communicate 6079 series...
Thank You
Would anyone share Fanuc 21i-MA ladder which uses the following unit.
A06B-6096-H### (Servo Amplifier)
A06B-6078-H206 (Spindle Amplifier)
A06B-6081-H106 (Power Supply)
A06B-6089-H711...
Would you please share the dummy connection. I also need to use one axis on 3 axis servo amplifier just for testing.
I tried turret restore procedure but get another Alarm OT0500 (Z)+ OVERTRAVEL (SOFT 1) during restore procedure.
Common Guys, I'm still waiting! Fanuc 16B ROM and RAM data. Did I post on a wrong place? Isn't the famous forum on the earth?
I replied on email. Pls have a look
Hi Experts, I'm building a system to test Fanuc amplifer specially A06B-6066 unit. Therefore I collected some used stuff over eBay. But unfortunately it doesn't have any SRAM backup and by mistake I...