Just curious... have you posted on eMastercam ??
Noticed a very similar thread, similar solutions, identical frustrations. Back in March ( yeah, I have an acc. there as well).
I've learnt...
Type: Posts; User: Superman
Just curious... have you posted on eMastercam ??
Noticed a very similar thread, similar solutions, identical frustrations. Back in March ( yeah, I have an acc. there as well).
I've learnt...
No. Don't uninstall / re-install, you need to diagnose the problem.
Have you tried to plug it into a different port, or even a different PC. It could still light up
You won't be able to run any...
Those hasps are quite hardy, unless it gets physically broken ( like snapped in half) ... does it still show the red light ?
Is it just,... not working ?
I work on network that is very...
Hang on... a nethasp you say, are all seats used at the same time ?
Is your laptop on the same network ( preferably hardwired),(or stand alone) ?
Are they up to date on maintenance on the Nethasp...
I'm surprised that they are not getting you onto 2024. That they even suggest 2019, is 5 years old,
Any "purple hasp" that has the maintenance level would run your X5 .... but, any "purchased...
If legit copy, .... and you have the damaged USB hasp.
Your reseller should be able to help, abeit it may incur a fee $$$
(everyone will try to put their hand into your pocket)
If the reseller...
Under what conditions are you trying to run the M code ?
Are you wanting to advance the quill or tailstock body ?
You may not be able to move either with spindle turning
If via program... it...
It could also be a sign of the tool being pushed up the spindle
... missing steps, if the tool is still projecting from the holder the same distance as when starting.
Use a panel saw to cut off the strips ?
Before you think about how you will measure things....
What have you in the way tooling ? (cutters, holders, drills etc) & the knowledge to apply them.
Tooling is not cheap, and the...
If you have the options on the m/c
Then the probe cycles should be accessible via the function buttons
We have DMU65 with iTNC 530 (Heidenhain)
In edit mode, go... CYCL DEF.... page...
Probably none... if you have only one machine.
If you had more than one, then you would need to select what machine you are writing code for.
Only a suggestion.
Have to power supplied from the spindle ON circuit, and an inline ON/OFF manual switch to the relay.
Spindle ON, power supplied to manual switch. Coolant can be turned ON/OFF...
We have the exact machine...
You should have many documents already installed on the control. A lot of programming was by experience and trial/error using the pre-loaded stuff. It told you where...
Your PC needs to connect to the machine's IP ... ours uses WAN settings
Your machine has to be open to allow connection
MOD>>External access (ON)>>END
Just a couple of questions....
Is stepover of 0.6mm correct ???
... what axes does your machine have ?
... on what diameter is the flats ?
... size across flats ?
A little sketch would help.
...
Another option may be the later software TNCREMO for transferring files via ethernet.
https://www.heidenhain.us/resources-and-news/heidenhains-tncremo-pc-software-now-available-online-download/
All this was addressed in early CNC evolution with the machines capable of "cutter compensation".
Program it once, .... then adjust the toolpath by a value held into the offset field... at the...
Ok ... can you guys explain this link
https://ezdxf.readthedocs.io/en/stable/concepts/units.html
This was seen in various docs explaining units, so I am assuming a generalised example.
Yes......
Nah.... I dont believe this. It does know what units the DXF was created in.
If I do a CAD drawing of a 1" cube, export a DXF
Now open that DXF into a different CAD system (default is millimetres)...
Mill it using C axis ....
Basic lathe operation is to be turning diameters only
Check your leadscrews, it could be the connection between it and the motor, or thrust bearing end play.
May even be play in leadscrew nut(worm ball bearing).
Try turning/moving by hand with...
Only guessing
You have an A output(around X) in the programming... but you have a B axis (around Y) in the machine configuration.
I think Craig thinks you are "driving" your machine from the DXF file...
DXFs are created in position & size with the originating CADware.
It is in your software that you need to adjust the design....
I would think it was a panel push button, or M code to turn ON and a different M code to turn OFF.
You may have to enable "milling mode" to interlock C to the handwheel.
Too fast (aluminium speeds), you are rubbing, not cutting.
Try 65m/min (S3500), & feed of 0.05mm/tooth
Neat oil may also make the cutter slip, not cut
Soluble oil @ 6-10% concentration
Make a stepped bung to fit in the end, and if the OD is not to be machined... make soft jaws to avoid damaging the finish
You could also make a stepped bung with centre for a tailstock centre.
You can purchase gauges for a dedicated range (ie... 0-1" or 0-25mm)
Or obtain sets for a larger range (ie... 0-6" or 0-150mm)
See link, the thimble separates between the knurl & zero indicator to...
G17/18/19 plane change only affects circular interpolation (the axis of the arc is perpendicular to the selected plane)