Thanks John :)
Type: Posts; User: Baxy
Thanks John :)
Hi,
My homing/limit switches are connected to the G540 via my motor power supply, which is 48VDC.
I've wired my switches per the sample wiring diagram in the G540 manual. i.e From the -VDC...
48V relays are definitely the way to go. I got mine from Homann Designs & followed the wiring diagram that Peter has produced:
http://www.homanndesigns.com/pdfs/EN010_V8.pdf
It should work very nicely, although you need to be careful with the coolant selection to make sure that you don't have any corrosion issues.
Hi,
I found this at http://sanyo-denki-online.com/
Our simplified stock numbering system identifies each motor instantly. As an example, here is our Nema Size 34, 720 oz/in., 6 amp, single...
Hi,
It might be easier to get hold of multistart metric trapezoidal screws.
Don't know what $$s are, but these might be worth a try:
Mecco have "Acme spindles 1-2-3 starts 10mm to 160mm in...