Search:

An open mind is a virtue...so long as all the common sense has not leaked out.
mikey74063 ask for help to make 1 slot in Aluminum .250 thaousands wide and only 1 inch long in a 1/4 inch thick...

Hi Slpd
10 people at 50 dollars is 500.00 dollars .....how many people more do you need ?
is this still avalible to Join ?
Tony

Hi Utopia
I have a freind that has Mach 3 ...I will ask him and get back to you .
what is the extention of the file u have to convert to mach 3
is it file.st2 ?

Hi Mickey
with the compound slide and vise U will be fine to make the slot in 1/4 alum.
the way u will want to do this is tighten the end mill good and plunge down like drilling a hole but move...

Hi 61Sedanman
with Mastercam x, x2, x3, x4 this works great and is easier than it sounds follow his instructions and U will be happy ..MC will regen the tool paths..almost everything I program is...

Hi Georg
Nice machine , Make sure U have option for tapered threads as these are 3 degrees included .. or will U program this Off line with Mastercam or other cad / cam ? ..
First I would...

Hello
Cnc Tapping where the Machine does all the process Requires Syncronous Tap Cycles ...Not sure if a home made Machine would be able to accomplish this and would require software to drive the...

Hi Inkydo69
Yes you can have multiple tool changes in 1 program ...in mastercam X2 if you are getting a sub for each tool .....Try this......before posting RIGHT click in the operations manager on...

Our Z-axis got out about .030 also it turned out to be the Screws holding the pickup was just loose enough to give when the cable got taught ...
Tony

Thanks cadcam
Very helpful Info !
Tony

Hi
I have used ez-cam for 15 years ....we purchased Mastercam x2 two years ago ...while i am loving Mastercam x2 ...i will never get rid of ezcam for all the reasons everyone has already...